| Price Range: | 10,000~25,000 |
|---|---|
| Minimum Order Quantity: | 100 Piece/Pieces |
| Certification Requirements: | EEC Standards including especially : - SIA380/1 - IEC 62108 - CENELEC EN50090 - CEN EN 13321-1 also know as ISO/IEC 14543-3 |
| Post Date: | Nov 12, 2007 |
| Expiry date: | Nov 10, 2008 |
|
What we are looking is a supplyer/manufacturer for :
A Fuel Cell power plant usable for home with externally stocked hydrogen canisters for security reasons. Those will be buriedable and also stackable for limiting explosion risks.
The system must be :
- Fully internaly recycling the used recombined water. Closed circuit like.
- Fully creating electrolysis of Hydrogen and Oxygen in a single closed circuit like.
- Plugable to a solar panel, wind power plant, or this kind of solar energy production unit like the suncube viewable here greenandgoldenergy.com.au/. Those must be provided as a complete production solution. Water Hoting will also be provided by the solar panels, and the energy complement will be used for electrolising hydrogen and oxygen. Note that the wind power plant must be the smallest and the noiseless as possible and should be available in different colors for smooth environement integration.
- It must have a simple design for maintenance and installation.
- It must have modular length easy plug links from hydrogen and oxygen canisters to the power plant unit. This means that the lenght could be adapted with plug to plug extension wire/cable.
- Canisters must be fully secured for long life use and maintenance. Canisters must be stackable for extending energy production with same presure over 4 hours each canister without electrolysis (Supposing it's by night for example).
- The power plant must be able to produce at least from 1.5KW to 15KW/H. Different power plant design and size are acceptable. At least the powerplant size musn't exceed the size of 2 squared meters and 1,5 meter high.
- It should be able to produce energy for a modern house using low energy consumption units, hoting in winter, freezing in summer. Low power consumption units should be avialable too for a complete integrated optionnal packages like Hoting unit, Freezing Unit, Fridge, Lights and much more... We are supposing that the house have a very good insulation and a very few loss of energy. The system must be plugable to an existing hoting system as a replacement with the help of a professionnal or a plumberman.
- A coupling module will also provided to couple the standard energy state network to the production unit (like reversed production) when system produces more energy than it use for itself.
- Of course, the powerplant will be enough secured to respect all EE standards.
Well, in the word of dreams, does anyone have this production capability ? :)
We know that this is technically possible, but strangely, noone does produce this one...
Note that if you are an industrial able to do this, we will buy it cash and we could hope a long long long very long partnership...
This member's information has NOT been authenticated or verified by Alibaba or any third party.
Only Alibaba Gold Suppliers and
TrustPass members have completed an Authentication and Verification procedure conducted by third-party credit-reporting agencies.
For more information on Alibaba Gold Supplier and TrustPass membership, Click here
.
