Dear Sir,
Please be informed about the facts as follows :
CASE 1.
We are talking about scrimmed needle felt without back coating plant specs as follows :
working width : 4 mts
fibre to be used ; Polypropylene or polyster
grammage range ; 100 gsm to 500 gsm of fibre
scrim to be used ; Jute
Needles we intend to use ; 25 gauge for pre needling and 32
gauge for finish.
Line could be consist Of;
Opener, Blending, feeder, Carding, Crosslapping, preneedler, upstroke punching, and finishloom with downstroke with scrim dewinder inbetween and winder with one edge cutter.
CASE II
We are looking for simple needle felt with following specs ;
Working Width ; 3 mts
Fibre to be used ; Garnetted acrylic waste with lots of acrylic
threads and other mixing also.
Grammage ; 500 gsm to 1200 gsm
Thickness of finished product required : 5mm to 12 mm
No scrim is required to be put in.
This line could mainly be consist of ;
Opener, feeder, carding, crosslapping, compression rolls and punching in a single go. and then winder with side and center cutters .
Needle Punching required is slow speed with larger stroke height and big mouth and compressing feeder system.
Now I think I have made myself clear . Anyother questions are welcomed.
Pl revert back with full information .
Thanks n Regards.
Gurbir Singh
.
