|
| Price Range: | 6,500~17,000 EUR |
|---|---|
| Minimum Order Quantity: | 1 Bag/Bags |
| Post Date: | Feb 16, 2008 |
| Expiry date: | Feb 15, 2009 |
|
ROTTEST
FIRE
In an environment, where we are together with flammable materials, there exists fire risk all the times. The most important point here is to take the required precautions, in order to eliminate the risks for fire and to be ready for firefighting, in the event of fire.
Reaching to fire scene may be very difficult, when it happens in narrow lanes and due to the heavy city traffic or forest areas. Each minute, fire will increase its strength and its damages increasingly and its extinguishing will get therefore much more difficultier. In case of necessity for urgent firefighting, Rotfire enables to reach the fire scene easily, because of its small structural size and light weight and it can be utilized only by one personal.
Fire initiates, when the three elements combine together and these are oxygen, heat and igniter While the traditional fire extinguishing equipments eliminate only one of these elements, the high pressurized micronized water fogging and foam spraying system eliminates oxygen and heat, in the same time. Thereby, it enables the extinguishing of fire more quickly and with less water usage.
WATER FOGGING AND FOAM
MICRONIZED WATER FOGGING
The high pressurized urgent fire extinguishing machine provides the fogging through spraying water drops of 5-100 pm micron size, which are transformed to fog by the system, under the pressure of 180-200 bars and applied onto the fire and these vaporize very quickly. It consumes huge amount of energy and decreases the heat of fire and eliminates the oxygen in the air and prevents the oxygen feeding the fire and applies suppression and cools down the atmosphere around the fire. Therewithal, it enables a more quickly fire extinguishing and heat reducing operation and requires 20 time less water consumption comparing to the traditional fire extinguishing equipments.
FOAM SPRAYING
Foam spraying system of micronized water/foam mixture with high and semi-thermal expansion and used for petrol- and gas product fires, when sprayed onto the burning petrol fluid, penetrates and forms a coating film over the burning fuel, which ceases its contact with air, so that the fire will be extinguished very quickly.
FIREGUN
ADVANTAGES OF THE SYSTEM
FIELD OF USAGE
With double lances, direction diverting valve, foam and fog nozzle.
Four-cycle engine, air cooled, starter, 12 volts, accumulator, fuel tank,
3000 rpm
Pump pressure: 180-200 bars.
Operation in BY-PASS circuit, with the trigger control.
Ceramic piston.
Pressure adjusting regulator.
Water pressure manometer.
Engine is directly coupled to the pumps gearbox.
With the foam dosage valve: Foam flow is provided at a ratio of 3%-6%.
With the foam selection control valve: A quick modulation is provided from the AFFF (* Aqueous Film-Forming Foam) foam tank to the SYNTHETIC foam tank.
40 meters (hose addition of 20-40 meters, if demanded).
Manuel operation handle and lock, with 40 meters hose wrapping capacity.
This member's information has NOT been authenticated or verified by Alibaba or any third party.
Only Alibaba Gold Suppliers and
TrustPass members have completed an Authentication and Verification procedure conducted by third-party credit-reporting agencies.
For more information on Alibaba Gold Supplier and TrustPass membership, Click here