Henny Penny Filter Paper Co

DEEP FILTER APPLICATION
Engine oil, hydraulic oil and fuel filtering systems used OEM filters can not filter under 10 microns. The particles in the main polluting oil particles are between 3-10 microns.
Study in the process of accumulation of pollutants in the working precision hydraulic valves, injector clicking komponeleri as they cause corrosion in engines, bearings and motor oil olurlar.Hidrolik system of six particles 10 microns in time to the accumulation of thick and fat as it can cause overheating due.
Normal operating temperature 10 degrees warmer on the half life of the oil drops. Machinery and equipment manufacturers and users must comply with the level of cleaning products are specified spesifikasyonlarnda. As an example, the hydraulic control valve manufacturers, the level of oil pollution as 9 or more NAS will require the use of clean oil.
Diesel engine oil in oil as well as metals in the abrasive residue (of institution) level is an important factor. Compression during combustion due to leakage of oil in the combustion enters indent We promote corporate causes. Diesel engines of this residue (resolution not matter - wt%) 2.5 on istenir. not apply and the system of construction machines, known as DEEP FILTER filtering capabilities and is designed according to the OEM filter elements according to the much more sensitive to provide filtering.
Savings
a) Oil consumption cost: Oil life of 5-8 times the cost of space will be reduced because the oil change
b) OEM filter life will be prolonged (3 micron filtration capacity of the application because of the filtering system of the OEM filter will reduce the pollution load
c) cost of oil change: Due to the prolonged life of oil needed for oil change service and personnel costs will decrease out-of-stay.
d) Waste management costs: The amount of waste and waste oil to lengthen the life of the administration (to get rid of waste) will decrease the cost of
. e) Vehicles and equipment remain in service: Oil change due to vehicle / equipment and dirty oil will cause the service to stop the machine / equipment to minimize the possibility of failure.

Form of the CONNECTION SYSTEM
1 - By-Pass Connection (hydraulic oil and diesel motor oils, the system is connected in parallel)
2 - Off-Line connection (the car on a single pump / motor unit with a portable or temporary vehicle is connected to outside)
3 - On-Line Connection (Fuel systems; Tools on the OEM fuel filter between the fuel pump, fuel pump or fuel pump stations will be linked to output)

a) Hydraulic system: A hydraulic oil due to be removed 80-95% and the thick oil is prevented from overheating. Thus, the slow oxidation of fat.
Through 3% cellulose elements DEEP FILTER hold water to the system due to water input minimizing the problems to happen. Hydraulic / servo valve of the fine tolerance work to prevent blockages due to hydraulic cylinder wear of shafts and felt that, because of the missing oil and water will minimize the input of elements .* OEM cleaning load is reduced and life is prolonged
b) Diesel engines: Silicium, metal and oil in particular the corporate activity (sludge) to be due to engine bearings and friction in the parts wear to minimize the oil passages tkanma prevents .* Oil sludge due to be fat and be bold to overheating is prevented, so that the oil is protected contributions, TBN (total base number) value is well clear of the load is reduced .* OEM components, and life is prolonged.
Deep filter system in the form of rolls sarml element is cellulose. Therefore provides a higher filtering. Element is a depth filtration paper was made during the height of verimlidir.Filtreleme much more in the process of filtering surface in the OEM element is the thickness of the corrugated paper filter element is being made; sarml Roll derinleme the filtration system, oil, filter element is subject to the depth and filtered by derinleme passes through a filtration process.