Pin Barrel Cold Feed Rubber Extruder

    Pin Barrel Cold Feed Extruder mainly consists of motor,gearbox,feeding device,barrel,screw,head,TCU etc.The machines are mainly used for the extrusion of semi-finished articles during rubber procession.Equiped with diffrent heads(and die) the extruder could be used for the production of tube,strip,cable/wire rubber-coating,various semi-finished part of tires etc.There are a series of sizes provide to you to choose.  

Pin-barrel cold-feed rubber extruder (XJD)

*Ralated with type of compund, temperature and die dimensions etc.

3.Brief introduction for extruders structure

Screw

  Screw material:38CrMoAlA, surface hardness could be HV900-950 after nitrited,with hardened depth of 0.4~1.2mm.Additionally, stellite screw(so called be-metal screw) could also be made, which has a layer of around 1.5mm thick stellite metal,and the surface hardness could be HRC58~62.Various types of screw could be designed so as to process different compound with mooney viscosity ML₁₊₄^100oC30-120,and to get relatively high output with lower discharging temperature.

Feeding section

  Feeding device(section),which is located between the gearbox and the pin-barrel,is equipped with a wide hopper for easy feeding of rubber sheets(or strips) and heatig/cooling channels in the house body for temperature control of this section.The section is inserted by a hardened liner with wide wide ribbed inner threads(rifles),and a feeding roll with hardened surface for compound enforced feeding,which is driven by output shaft of gearbox through gears.

Barrel

  This barrel is made of quality alloy steel,equipped with heating/cooling channels of drilled structure to control temperature.The inner surface of barrel could be nitrated with hardness of HV950-1000,nitrated layer arround 0.5mm thick;or inlayed with stellite metal(bi-metal),with thickness 1.5mm,surface hardness HRC60~64.Multi-row pins are arranged on the pin-type barrel in a way of fixed distance,pins are inserted into the barrel,nearly to screw thread channel along circumference.

Driving

  The standard drive device is Z4-type D.C.motor with SCR.0.1%speed stability and stepless speed variation between 1-10 times could be realized to get excellent extruding processing properties.However other drive system e.g.vector AC motor could also be adopted to realize various speed driving and control if required by buyers.

Gearbox

  The gearbox can be of vertical or horizontal,its gears are carburized and quenched on surface (hardened gear surface),with processing accuracy of 6-grade,the gearbox has features of small size,long working life and lower noise etc.

Temperature control unit(TCU)

  The TCU is composed of closed circulating loops,could be heated by electric power or steam,and cooled through a heat exchander.Temperature adjustment is realized through PID with instrument or PLC.The circulation temperature could be brtween35^oC-95^oC with controlling accuracy of ±1.5^oC.The quantity of loops depends upon extruder size and process requirements.

Extruder head

  Various heads such as those for pipe,strip,feeding for calender,and Tor Y head for rubber coating could be provided.Also duplex,triplex or multi-plex head for making profiles such as tread or sidewal of tires could be designed and manfactured.