buy HDPE pellet / HDPE raw material

General

Material Status

l         Commercial: Active

Availability

l         Pacific Rim

Test Standards Available

l         ASTM

l         ISO

Uses

l         Netting

l         Rope

l         Tape

Forms

l         Pellets

Processing Method

l         Extrusion

Physical

Nominal Value

Test Method

Density

0.950g/cm³

ISO 1183

Melt Mass-Flow Rate(MFR)

0.82g/10min

ISO 1133

Enviro. Stress Crack Res (Compression Molded)

30.0hr

ASTM D 1693

Mechanical

Nominal value Unit

Test Method

Tensile Stress at Yield (Compression Molded)

3920 psi

ISO 527-1,-2

Tensile Stress at Break(Compression Molded)

2180 psi

ISO 527-1,-2

Tensile Strain at Break(Compression Molded)

450 %

ISO 527-1,-2

Flexural Modulus(Compression Molded)

174000 psi

ISO 178

Impact

Nominal Value Unit

Test Method

Charpy Notched impact Strength

6.66 ft·lb/in²

ISO 179

Hardness

Nominal Value Unit

Teat Method

Durometer Hardness(D Scale, Compression Molded)

63

ASTM D2240

Shore Hardness(Shore D, Compression Molded)

63

ISO 868

Thermal

Nominal Value Unit

Test Method

Brittle Temperature(Procedure A)

-76.0

ASTM D746

Brittleness temperature

-76.0

ISO 974

Vicat Softening Point

253

ASTM D1525

Vicat Softening Temperature

253

ISO 306

Peak Crystallization Temperature(DSC)

268

STM D3418

Peak Crystallization Temperature(DSC)

268

ISO 3146