Force 2 Diesel Fuel Conditioner

Force2

Force2 is a liquid fuel conditioner, approved for use in all medium and heavy duty fuel oils including bunker and all grades of Diesel Fuel in a 1:2000 ratio and is available in the following forms:

1 Bottle (250ml) treats 500 Litres of Fuel

Force2 Summary:

• Save up to 28% fuel consumption guaranteed
• Reduce emissions up to 80% guaranteed
• Clean and maintain your engine
• Reduce smoke and harmful emissions
• Complete corrosion protection
• Easy to use

Added benefits and features:

Combustion Improvement
Incomplete combustion occurs when the fuel is not sufficiently atomized prior to ignition or when the oxygen supply is insufficient to allow full combustion. Incomplete combustion increases the release of carbon monoxide, sulphur dioxide, as well as unburned fuel in the form of smoke. As a result, ash build-up will occur, causing problems with pre ignition, oil system contamination and exhaust system fouling. Also, poor atomization will lead to an increase in the time the fuel takes to burn, increasing exhaust gas temperature thereby increasing nitrogen oxide emissions.

Force represents a break-through in fuel chemistry. This advanced formula combines the most effective combustion catalyst known to man, which speeds up the rate of the exothermic reaction. These two actions dramatically increase combustion efficiency, thereby increasing power output and fuel efficiency.

Water Contol

Fuel oils also contain more entrained water than the more highly refined fuels, and this creates additional risks of corrosion and fuel contamination, and also provides a breeding ground for bacterial and fungal growth. Left untreated, these micro organisms will multiply, contaminating fuel lines and clogging filters and injectors, causing poor performance and high emissions. Water contamination will bring with it sediments and dust which will form sludge in the fuel.

By emulsifying the water with the fuel, Force deprives the micro organism of a home and it then dies. The water is then able to pass harmlessly through the combustion chamber.

Sludge Reduction
Diesel Fuel generally contains a higher number of impurities than petrol, and dust may find its way into the fuel tank during storage, causing deposit build up in the bottom of the tank. The existence of these impurities causes the fouling of fuel lines, injectors and filters, resulting in poor fuel supply. This will lead to poor atomisation and therefore incomplete combustion. These contaminants may also filter their way into the oil system, degrading oil quality and reducing engine life.

Force contains detergents and dispersants which counteract sludging through dissolving sludge build up in fuel lines and injectors. This improves the fuel flow and the atomisation of the fuel in the combustion chamber, and the accumulation of future build up.

Acid & Sulphur Control

Fuel oil exhibits some very unique characteristics, as it is a lightly refined product of the petroleum industry. This sulphur will react with the water present in the fuel to form sulphurous and sulphuric acids. Sulfur as well as harmful metallics, such as Vanadium, can also lead to higher levels of power robbing carbon deposits.

The presence of these acids and deposits will cause corrosion to fuel tanks and lines, injectors and exhaust systems. Force neutralizes acid found in the fuel, preventing further acid action. Also, by emulsifying the water in the fuel, it prevents further acid formation. The sulphur present in the fuel is passed through the combustion chamber and out of the exhaust.

All Force products are manufactured to ISO9001 standards and have been
comprehensively tested by leading independent testing institutes and major companies.