Fib floor Sl Epoxy

FIBFLOOR (SL)

Self - Levelling Epoxy Floor Topping

Fibfloor SL is a three component pigmented epoxy floor topping which is laid at a thickness of 0.5 mm to 2 mm. Fibfloor SL is jointless, monolithic, smooth, non-porous, hygienic, and chemically resistant and is easy to clean and maintain. It is available in a number of colours and has sufficient strength to withstand industrial traffic with nylon/rubber  wheels.

Fibfloor SL is resistant to fungal, bacterial growth, wear & tear and is ideally suited for areas where hygienic, dust free and resistance to abrasion is required. It is recommended for application in the following areas:

              Chemical  plants

              Pharmaceutical Industries

              Food Processing Areas

              Bottling Plants

              Electric/Electronics Industries

              Computer Rooms

              Hospital Operation Theatres & Corridors

              Nuclear Power Plants

              Dairies & Breweries

              Laboratories

              Aerospace Industry

              Airport Hangers

              Picture Tube Manufacturing Plants

              Automobile Workshops

              Fermentation Floors in Tea Gardens

              Textile Mills

              Easy to apply. Flowable consistency for self leveling application.

              Has excellent bond to concrete and other substrates like Kota stones (seamless, non    staining) does not allow growth of bacteria hence suitable for potable water or food storage

              Good resistance to abrasion. Does not generate dust even under vehicular traffic

              Available in attractive colours

              Excellent resistance to chemicals

Correct preparation of surface is essential. Fibfloor SL should be laid only if the moisture content of the floor is below 5 %. When applied over concrete, the surface must be sound, free from dust, oil, grease and other contaminants. Remove oil and grease by scarifying or acid wash or by burning followed by washing with liquid detergent. Allow the floor to dry before priming. Where there are expansion joints in the floor,

FIBFLOOR (SL)