Steel packer OPD with double casing and ball-head nipple. Connection onto the grouting pump is done by means of coupler 4 jaws.
Steel packer OPK is equipped with double sealing rubber. Dismantling of the OPK packer is due to its construction very easy.
Aluminum packer APD. It is produced in a version M8. Recommended working pressure: 20 MPa (200 bars).
Plastic filling injector isn't fitted with clack valve.It is used for pressure-less and low-pressure grouting to 10 MPa.
Aluminum packer APD with double-valve is specially developed packer that enables its immediate dismounting after the grouting.
Steel packer OPK is equipped with ball-head nipple. Dismantling of the OPK packer is due to its construction very easy.
It is a manual grouting pump with the volume of 1 litre. It is adjusted for classical grouting with one-component materials.
Steel packer OPD with double-casing and with the flat-head nipple with a diameter of 16 mm.
The alloy packers SPK kombi are produced from the alloy of zinc ( 93%), aluminum (4%), cadmium(2%) and other additives.
Plastic filling injector with the clack-valve. It is used for a pressure-less and low-pressure grouting to 10 MPa (100 bars).
Steel packer OPK with double-valve. The packer is fitted with second clack-valve placed in the head of the packer.