Filter by:
  • On-time shipment and pre-shipment product quality safeguards
  • Refund up to the covered amount agreed with your supplier
  • Learn More >
Minimum Order: OK
View as:

Hand Operated Oil Pump

Hand Operated Oil Pump is Suitable for General Lubricants and Gear Oils and has 20 Liter Capacity

PL1000 Swing Gate Openers

PL1000 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 120W
Peak Thrust: 10500N
Nominal Thrust: 10000N
Power Supply: 24V DC
Current Rating: 5A

PL600 Swing Gate Openers

PL600 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 96W
Peak Thrust: 6500N
Nominal Thrust: 6000N
Power Supply: 24V DC
Current Rating: 4A

PL800 Sliding Gate Openers

PL800 Sliding Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Motor-Transformer: 7152-EI86
Nominal Thrust: 7000N
Power Supply: 24 Vdc
Engine Rpm: 2600RPM
Gate Weight: Up to 800 KG
Gate Length: 8M

PL500 Sliding Gate Openers

PL500 Sliding Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Motor-Transformer: 5844-EI86
Nominal Thrust: 5000N
Power Supply: 24 Vdc
Engine Rpm: 3800RPM
Gate Weight: Up to 500 KG
Gate Length: 6M

PL400 Sliding Gate Openers

PL400 Sliding Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Motor-Transformer: Worm gear
Nominal Thrust: 3000N
Power Supply: 24 Vdc
Engine Rpm: 3800RPM
Gate Weight: Up to 400 KG
Gate Length: 5M

PL300 Sliding Gate Openers

PL300 Sliding Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Motor-Transformer: 4734-EI66
Nominal Thrust: 3000N
Power Supply: 24 Vdc
Engine Rpm: 3400RPM
Gate Weight: Up to 300 KG
Gate Length: 4M

R60 3-phase for Swinging Gates

R is a range of geared operator specially designed for installation on the end of the leaf on large swing gates

Max leaf length: 15m
Max leaf weight: 12000 kg
Average opening time: 116 s
Daily cycles suggested: 300
Service: 100%
Number of consecutive cycles guaranteed: 300

PW330K Swing Gate Openers

PW330K Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 144W
Peak Thrust: 3500N
Nominal Thrust: 3000N
Stroke Length: 350mm
Power Supply: 24V DC

PW320K Swing Gate Openers

PW320K Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 144W
Peak Thrust: 3000N
Nominal Thrust: 2500N
Stroke Length: 356mm with mechanical stopper
Power Supply: 24V DC

PW330 Swing Gate Openers

PW330 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 144W
Peak Thrust: 3500N
Nominal Thrust: 3000N
Stroke Length: 350mm
Power Supply: 24V DC

PW320 Swing Gate Openers

PW320 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Max. Absorbed Power: 144W
Peak Thrust: 3000N
Nominal Thrust: 2500N
Stroke Length: 356mm with mechanical stopper
Power Supply: 24V DC

PW230 Swing Gate Openers

PW230 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Peak Thrust: 3000N
Nominal Thrust: 2500N
Stroke Length: 350mm
Power Supply: 24V DC
Maximum Gate Weight: 300 kg per left

PW220 Swing Gate Openers

PW220 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Peak Thrust: 2500N
Nominal Thrust: 2000N
Stroke Length: 356 mm with mechanical stopper
Power Supply: 24V DC
Maximum Gate Weight: 200 kg per left

PW200 Swing Gate Openers

PW200 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Nominal Thrust: 2000N
Stroke Length: 400mm
Power Supply: 24V DC
Absorbed Power: 60W
Maximum Gate Weight: 200 kg per left

PW150 Swing Gate Openers

PW150 Swing Gate Openers comes with 24V DC electro-mechanical gear motors & provides durability & silence in motor operation

Gear Type: Worm gear
Nominal Thrust: 1500N
Stroke Length: 360mm
Power Supply: 24V DC
Absorbed Power: 48W
Maximum Gate Weight: 150 kg per left

Pneumatic Fluid Extractor

Pneumatic Fluid Extractor is Simple and Easy to Operate Suitable for Engine Oil, Gear Oil, Transmission and Brake Fluid Water

64g Metal Gear, Digital Servo for RC Helicopter - RC models (14.5KG.CM), Half Alloy Housing by CNC

Operating voltage: 4.8v~6.0v Test voltage: At6.0v Operating speed: 0.09s/60` Stall torque: 14.5kg. Cm(187.40oz. In)

Place of Origin: CN;GUA
Model Number: PDI-2131MG PRO
14.5KG.CM: Metal Gear Digital Servo
Tags: Servo
Unverified Supplier - AGISTECH INC.

58g Metal Gear, Digital Servo for RC Helicopter - RC models (14.5KG.CM),Middle Alloy Housing by CNC

Operating voltage: 4.8v~6.0v Test voltage: At6.0v Operating speed: 0.09s/60` Stall torque: 14.5kg. Cm(187.40oz. In)

Use: Vehicles & Remote Control Toys
Place of Origin: Guangdong, China
Model Number: PDI-2131MG PRO1
14.5KG.CM: Metal Gear Digital Servo
Tags: Servo
Unverified Supplier - AGISTECH INC.

Hight torque ultra 14.5KG.cm metal gear digital servo RC models, full metal alloy case made by CNC for RC models - RC helicopter

Operating voltage: 4.8v~7.4v Test voltage: at6.0v Operating speed: 0.09s/60` Stall torque: 14.5KG.cm Size:40x20x40mm

Size: 40x20x40mm
Use: Vehicles & Remote Control Toys
Type: all RC models
full alloy case made by CNC: metal gear
Place of Origin: Guangdong, China
Model Number: PDI-HPRO 2131MG
Unverified Supplier - AGISTECH INC.

Hight torque ultra metal gear digital servo RC models, full metal alloy case made by CNC for RC models - RC helicopter

Operating voltage: 4.8v~7.4v Test voltage: at6.0v Operating speed: 0.07s/60` Stall torque: 9.8KG.cm Size:40x20x40mm

Size: 40x20x40mm
Type: all RC models
Place of Origin: Guangdong, China
Model Number: PDI-HPRO 2082MG
full alloy case made by CNC: metal gear
Unverified Supplier - AGISTECH INC.

58g Metal Gear, Middle Alloy Case Digital Servo for RC Helicopter - RC models (9.8KG.CM)

Operating voltage: 4.8v~6.0v Test voltage: At6.0v Operating speed: 0.07s/60` Stall torque: 9.8kg. Cm(136.10oz. In)

Place of Origin: CN;GUA
Model Number: PDI-2082MG PRO1
9.8KG.CM: Metal Gear Digital Servo
Unverified Supplier - AGISTECH INC.
Show : 20 38 50
Prev 1 Next
  • Haven't found the right supplier yet ?

    AliSourcePro

    1 request,multiple quotations
    1-click quotation comparison
    OEM,ODM & multi-category buying

  • Want product and industry knowledge for "gear opera..." ?

    Trade Alert

    Trade Alerts are FREE updates on topics such as trending hot products, buying requests and supplier information - sent directly to your email inbox!

Do you want to show gear operated or other products of your own company? Display your Products FREE now!
Suppliers by Country/Region
Confirm Cancel
Get better results for gear operated.
...
suppliers can give quotations.