Our set of antenna rods consists of 2 parts:
1. Receiving Antenna Rods -- The rods are powered by the Power Module, they are 45cm in length.
Each rod has been gold plated, and does not suffer from oxidation by the contact with the human skin PH.
The purpose of the Rods is to indicate to the operator that he/she has faced the energy line between the user and the Target. The rods are normally held steady and balanced at waist level, and slightly in front of the operator.
They are held pointed in a forward direction parallel to each other, and at a distance of 8 to 18 inches apart. What each individual needs to discover is just what distance best relates to themselves. This decision will be by trial and error. Please remember that an individual who is relaxed and calm will operate the equipment more successfully than one who is tense and rigid The rods will cross naturally by themselves when you enter the target line.
When it first happens for you, you will learned to anticipate success and will welcome it when it happens!
2. Power Module -- This unit's purpose is to power electricaly the Antenna Rods.
This way the system is not self-potential. By increasing user bio-energy, the power module permits everyone to be a successful user, even those that are not dowsers and never used dowsing antennas before.
The unit contains a 9VDC battery for a power supply. The battery condition is displayed when you short circuit the rods together, if no sound is heard it’s time to change the battery. To replace the 9 volt battery, simply open the module by rotating the bottom cap off. The power module is turned on when the receiving Antenna Rods are plugged in the Power Module's receptacle.
When not in use, unplug the Rods from the Power Module! Storing the Power Module with the Rods plugged in will drain the 9 volt battery.
Do not allow the Rods to touch each other while attached to the module as this will short out the battery also!