Ultrasonic sensor for flow meter TL10008
1. Small size and light-weight
2. High sensitivity and high sound pressure
1.0Mhz electronic ultrasonic water flow sensor
Ultrasonic Transducer Features: 1. Small size and light-weight 2. High sensitivity and high sound pressure 3. Low power consumption 4. High reliability
The ultrasonic transducers NOT ALL LIST here, please contact us for more details. Welcome for OEM/ODM!
700Pf ±50 PF
1.General regarding the relative sensitivity, measurement method works for me: two transducers placed in the pipeline is relatively away from the 30cm, add one of a signal 8V incentives, one should be able to receive more than 50mv receiver voltage (Without amplification). 2. Do not apply D.C.voltage for ultrasonic sensors to avoid migration. 3. Because the sensors have potential direction, please pay attention on the installation location. 4. Do not use the sensors where temperature is higher than rated, in order to ensure reliability and long service life. 5. Do not use the sensors in a vacuum zone or hazardous areas. 6. Do not use in a steam zone, this area of the atmosphere produce uneven temperature gradient will lead to measurement error. 7. The products should not be used or stored in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the like are present. Store the products in the room where is normal temperature and humidity, and avoid the sunlight, sudden changes in temperature and humidity. It may cause of failure or malfunction in such conditions if it was stored in bad environment. 8. If the frequency you want are not listed; or you have any other demands, just tell us WHAT YOU NEED!