P.M.A. for wind energy and hydro generation, large Neo's and Copper coils. 200w-1Kw with low rpm outputs.1.5-2.5Kw Max Grid Tie
I can supply these superior output pma's. 200w-300w-500w-600w-800w-1Kw-2Kw-2.5Kw.(1.5Kw in photograph) in quantities of 10 or more , but can be mixed models. . These are far superior to most others due to their large coils and design which allows rated power at only 330-360 Revolutions per minute, please note these are 'rated' outputs not maximum, these are higher. The 600w rated actually makes 900watts maximum!.
The 2Kw makes this at only 290 rpm, and peaks at 2.5Kw at 330 rpm.Other makes often need 450-500rpm.
Finned alloy casings ensure efficient cooling even under load, and units all have good sized bearings for horizontal use only, and are also virtually ideal for Micro Hydro power installations.
Orders or 10 or more welcome, expected deliver 30-34 Days, full engineering drawings available, all these units mount with simple and safe x4 bolt fixings. These are already used on many Commercial Turbines.
I have personally tested the 300 watt unit and can confirm that the charge current & voltages are excellent at quite modest rpm , due to the generous quantity of Neos and Coils within. (unlike some other cheaply made units which need 500+rpm).
Please see You Tube wind4watts or message me through Alibaba giving your email for specifications if required as there are several pages. Price for 2 units is £1600 each plus shipping (to be acertained-quoted in each case) David.