|Place of Origin:||Henan China (Mainland)||Model Number:||HUA YUAN||Brand Name:||JGD|
|Structure of the pipe fittings:||
flange and rubber
|material of the flange:||
carbon steel,cast iron,SS302,SS304,
|Standard of the flange:||BS,DIN,ANSI,JIS,ASA|
|Material of rubber:||EPDM,NBR,CR,IIR,SBR,||Lining frame:||
chinlon cord fabric,nylon cord fabric,steel wire
|Working pressure:||1.0bar,1.6bar,2.5bar ,3.0bar||Certificate:||CE||Warranty time:||2 years|
|Packaging Detail:||Rubber joint in pipe fittings: Flexible rubber joint is assembled with rubber hose and retaining ring flanges, and the rubber hose could be easiely damaged in delivery. So Huayuan packs each flexible rubber joint with a separate carton case to prevent the crash of the flanges and rubber hoses, each case painted the name of rubber joint and other details. The carton cases then be filled to plywood cases to ship. Inside of each plywood case, Huayuan always uses moistureproof material to keep the products in|
|Delivery Detail:||5days after received your down payment or as your order|
rubber joint in pipe fittings:
1.20 years experiences exporting
3.sample can be sent
4.delivery on time
Rubber joint in pipe fittings:
1. Rubber joint in pipe fittings composition and Material :
Nylon cord fabric
Hard steel wire
Mild steel/CAST IRON/SS/Q235
2.Detailed Description of the rubber joint in pipe fittings
1.Small volume,light flexible ,easy to install and maintain
2.It reduces structural noise transmission with strong shock absorption in servive.
3.It is capable of horizontal,axial and angular displacement with the restruction and flange non-parallelism.
4.The inner seamless high-pressure rubber joint independently developed by us prevents corrosive medium from etching the inner wall of the rubber joint in high temperature ,acid and alkali and oil resistant pipeline,thereby extending its service life .
4. main connecting dimensions of the rubber joint in pipe fittings:
the quality of hole
Bolt hole diameter
|Diameter of the central ring of the bolt(mm)||Axial displacement(mm)||Horizontal displacement |
1. Flexible Rubber joints supply range can be up to DN3000, detailed data can be offered upon request.
2. Control units must be used when piping is not properly anchored.
3. The rated pressure 2.5MPa products will only be sold with control units.
4. Flexible Rubber joints pressure rating is based on 30°C operating temperature. The pressure rating is reduced at higher temperatures.
5. Flexible Rubber joints weights in the above table are joints with DIN PN16 drilling retaining ring flanges.
6. Movements shown in the above table are non-concurrent.
7. Rated pressure in the above table is the maximum "working pressure". Test pressure is 1.5 times "working pressure", Burst pressure is 4 times " work pressure".
8. Normally, the flange drilling is based on DIN PN16, ANSI 150/250/300 lbs, BS PN10, JIS 10K are also available upon request.
Looking forward to cooperate with you