Standard anlistatig packing 50pcs per box Part No. QTY per Box Gross Weight Box Size H0006-9 50pcs per plastic box 0.0044kg 4*4*1cm
3 days after confirmation
100w high power led price
same colour.high light,energy conservation,
shenzhen Led Worker.
Luminous Flux (φV)
Wavelength(λd) Color Temperature(Tc)
High power LED is brighter than the normal LED. But also is much heater than the low power LED. In order to play a better performance of our products, ensure less defects during customers use, please pay attention to the devices in the application of electrostatic protective, heat dissipation, welding process.
2,Low power consumption: As 75lm / w light efficiency LED power consumption than equivalent incandescent brightness reduced by 80%
3,Long life: Product life up to 50,000 hours, 24 hours of continuous light can be used for seven years
4,Fast response: Brightness and color easy to dynamically control: enables dynamic color changes and digital control
5,Environmental protection: No toxic metals mercury, no infrared and ultraviolet radiation
7,Various colors: Different wavelengths produce different colored light, bright saturated, without filter, the formation of a variety of different colors available red, green and blue primary colors, full-color gradient color effects
8,Good color uniformity
Street lamps, spotlights, architectural lighting landscapes, lighting exterior illumination and so on Wall lamps, underwater lamps, decorative illumination and so on Underground lamps, reading lamps, emergency lights and interior illumination Miners lamps, flashlights and car lamps Traffic signals, indicating lamps
Can be produced according to customers' special needs; period of time longer;
standard 1W enough power design, never adulterated.
Access to the heated soldering iron temperature should not exceed 300 ° C / 5 seconds;
Thank you for using our high-power LED.In order to play a better performance of our products, ensure less defects during customers use,please pay attention to the following installation recommendations, That for reference only, high-power LED products and devices in the application of electrostatic protective, heat dissipation, welding process has a great impact on their properties, applications, For that, it requests end customers pay attention on seriously.
Firstly, heat dissipation: Due to the limitations of semiconductor light-emitting diode chip technology, LED photoelectric conversion efficiency still need to be improved, especially in high-power LED, because their higher power, about 60% of theelectronic energy will become heat release (as development of semiconductor technology, photoelectric conversion efficiency will be gradually increased), which requires end-user to do a good job for heat dissipation and ensuring that high-power LED products working on a normal condition in the application of high-power LED products.
Based on product characteristics and long-term experience of aging test data, Our company concerning heat to make suggestions for your reference!
1. Heat sink requirements. Appearance and materials: If product seal don’t have a strict require, can occur outside the direct flow of air environment, the proposed use with aluminum or copper fin heat sink.
2. Effective cooling surface area: 1W high power LED for white (other colors the same) we recommend the Secretary for the effective cooling surface area of heat sink sum ≥ 50-60 square centimeters. 3W products recommended for effective cooling surface area of heat sink sum ≥ 150 square centimeters, more power to increase, as the case and test results, as far as possible ensure the heat sink temperature does not exceed 60 °C.
3. Connection methods: High Power LED substrate and heat sink to connect the two contact surfaces, please ensure smooth, good contact, the two contact surfaces to enhance the degree of integration, the proposed bottom of the LED substrate or heat sink surface coating layer of thermal grease (thermal conductivity of silicon resin thermal conductivity ≥ 3.0W/mk), Thermal grease required coating uniformity, adequate, and then screw press stationary.
Second, electrostatic protection: LED is a semiconductor device, more sensitive to static electricity, especially for white, green, blue, purple LED to the prevention of static electricity and eliminate static electricity work:
1,Static electricity generation:
(1) Friction: In daily life, to makeany two objects with different materials contact each other then separatewilllead to static electricity. The most common way to generate static electricity is static friction. The better the insulation material, the more likely to generate static electricity. In addition, tomake any two different objects contact each other then separatealso will generate static electricity.
(2) Induction: for conductive materials, as the electron can freely flow on its surface, if placed in electric field, because of the principle of Like repel, opposites attract, positive and negative ions will be transferred and result in electric charge on its surface..
(3) Transmission: for conductive materials, as the electron can freely flow on its surface, if contact with electrically charged objects, the charge transfer will occur.
2, Electrostatic hazards on the LED:
(1) Because of the heat caused by instantaneous electric field or current will lead to partially injured in LED, hence showing rapid increase in leakage, and the LED can still work, but the brightness will decrease(white light will change color), and life is impaired.
(2) Due to the electric field or current damage the insulation layer, the device does not work (completely destroyed), showing dead lights.
3, Static protection and elimination of measures:
During the entire process (production, testing, packaging, etc.) all staff in direct contact with the LED to be good measures to prevent and eliminate static electricity, including:
(1) Shop floor and do a good job laying of anti-static grounding.
(2) Anti-static table to table, a good grounding producing machine.
(3)The operator to wear anti-static clothing, with anti-static wrist strap, gloves, or foot.
(4) Ion blower and soldering iron good electrical grounding measures.
(5) Using anti-static packaging materials.
Third, welding: welding select constant temperature soldering iron, soldering temperature is 260 °C. LED touch pad with a soldering iron will not take more than 3S, (Soldering iron welding must be grounded, the operator should wear a static bracelet or fan blowing ion). As the high-power LED followed ampere characteristics of diode, if the drive voltage fluctuations, the corresponding drive current drift very easily damaged lamp beads. Therefore recommended that customers use the more stable constant current drive power, or IC, instead of using constant drive power, or IC..
Fourth, once again thank you for taking the time to read busy some of our high-power considerations. Hope that our company can give you some suggestions for better use of light and hope LED lighting innovations of the times can bring you or your customers even greater benefits. So that LED really achieve energy saving, environmental protection, the effect of long-life, play a greater light efficiency.
If you have the intention, do not hesitate to call me maybe.
LEDworker is one of the key LED lighting enterprises in Shenzhen. Our company specializes in the manufacture and export of LED lighting products. The key to our success is providing quality products with reasonable price and the responsibility service. We have a highly efficient team to deal with inquiries from customers. Our goal is let LEDworker light the whole world. We are experienced in selling goods to the USA, Canada, Brazil, Chile, Columbia and enjoy a good reputation among clients. I...