|Place of Origin:||Zhejiang China (Mainland)||Brand Name:||GWIEC||Model Number:||GIE PR1010|
|Application:||Charger Controller||Rated Voltage:||12V||Maximum Current:||10A|
1. Automatic detection of voltage
2. PWM control
3. Multistage charging technology
4. with LED Working indicators
The GIE PR 10-30 series of charge controllers is the highlight in the range.
The latest charging technologies, combined with a GIE AtonIC state of charge determination which
has been significantly improved once again, result in optimal battery maintenance and control of the
module output of up to 900 Wp which can be connected to it. A large display informs the user about all
operating modes with the aid of symbols.
The state of charge is represented visually in the form of a tank display. Data such as voltage, current
and state of charge can also be displayed digitally as figures on the display. In addition,the controller
has an energy meter which can be reset by the user.
Electronic protection functions:
|Characterisation of the operating performance|
|DC Input side|
|Open circuit voltage solar module||< 47V|
|DC Output side|
|End of charge voltage||liquid 13.9V(27.8V); GEL 14.1V(28.2V)|
|Boost charge voltage||14.4V(28.8V)|
|Reconnection voltage (SOC/LVR)||>50%/12.6V(25.2V)|
|Deep discharge protection(SOC/LVD)||<30%/11.1V(22.2V)|
|Fitting and construction|
|Terminal(fine/single wire)||16mm2/25mm2-AWG 6/4|
|Degree of protection||IP32|
for both AC and DC
Inverter systems are designed as solar home systems. The central solar charge controller ensures the battery is charged correctly and pretects it against overcharging. In addition, a stand-alone inverter is connected directly to the battery in these systems so that AC appliances can be operated.
If DC appliances are also used, they can be connected directly to the charge controller. An AC system can be created with a system voltage or battery voltage of 12V, and also with 24V or 48V for greater capacities. This simple system concept makes installation quick and easy.