Valve regulated lead acid series ups batteries are designed with AGM (Absorbent Glass Mat) technology, high performance plates and electrolyte to gain extra power output for common power backup system applications widely used in the field of UPS, Emergency Lighting System.
Specification Data Sheet
20 hours rate(13A 10.8V)
10 hours rate(25A 10.5V)
5 hours rate(43A 10.5V)
1 hour rate(159A 9.6V)
Full charged battery 77°F(25°C):4mΩ
Capacity affected by Temperature (10 hour rate)
Capacity after 3 month storage
Capacity after 6 month storage
Capacity after 12 month storage
Max discharge current77°F(25°C):1250A(5S)
Charge (Constant Voltage)
Float:13.6 to 13.8V/77°F/(25°C)
Cycle:14.4 to 14.7V/77°F/(25°C)
1. Container/Cover: Made of UL94HB and LU 94V-0 ABS Plastic
2. Negative Plates: Use the special PbCa alloy grids, optimize the recombination efficiency and less gassing.
3. Separator: Import high quality AGM separator.
4. Positive Plates: PbCa grids minimize corrosion and prolong life.
5. Terminal post: Cooper material with maximum conductivity, enhance the high current rapidly.
6. Vent Valve: Allows the release of excess gas automatically for safety.
Control systems, Electric toys, Emergency lamp, Power tools, Medical treatment equipment, Alarm system, Emergency light system, Standby power supply, UPS and computer standby power supply, Power system, Telecommunication system, Firefighting equipment standby power supply, Railway station, Ship Equipment, Military Equipment, Telephone switching system.
Excellent safety performance.
Good discharging performance.
Good stock-proof performance.
Good impact-proof performance.
Good resistance to over discharge.
Good resistance to overcharge.
Good resistance to high current.
Factory & Office
Batteries & Package
Q : what is AGM battery
A : The newer type of sealed non-spillable maintenance free valve regulated battery uses "Absorbed Glass Mats", or AGM separators between the plates. This is a very fine fiber Boron-Silicate glass mat. These type of batteries have all the advantages of gelled, but can take much more abuse. These are also called "starved electrolyte. Just like the Gel batteries, the AGM Battery will not leak acid if broken.
Q : what is Gel battery
A : A gel battery design is typically a modification of the standard lead acid automotive or marine battery. A gelling agent is added to the electrolyte to reduce movement inside the battery case. Many gel batteries also use one way valves in place of open vents, this helps the normal internal gasses to recombine back into water in the battery, reducing gassing. "Gel Cell" batteries are non-spillable even if they are broken. Gel cells must be charged at a lower voltage (C/20) than flooded or AGM to prevent excess gas from damaging the cells. Fast charging them on a conventional automotive charger may be permanently damage a Gel Battery.
Q : What is a gel cell battery or sealed lead acid battery?
A : Gel cell or sealed lead acid batteries have basically the same chemistry as wet or flooded cell batteries. The batteries' electrolyte is in a gelatin form and is absorbed into the plates. The battery is then sealed with epoxy. These batteries may be used in any position. They are exceptionally leak resistant. Applications include UPS devices, emergency lights, and wheelchairs. These batteries contain 2 volts per cell with common voltages of 4, 6, and 12 volt.
Q: If a battery fails, what will be the indications?
A : You should first check the battery for defects such as a broken circuit, a short, or a broken container. If an outward problem is not apparent, then you will have to check the battery's capacity using known measuring techniques to ascertain the problem.
Q : Why "zero voltage" might happen?
A : Zero voltage means there is a broken circuit. There could be several reasons for a zero voltage state. 1.There could be a broken electrode column 2.Welding defects of the partition 3.Welding defects of the terminal
Q : How about your delivery time uauslly ?
A :7-10 days for common model battery , 15-20 days for the other special battery.
Q : What is your warranty time for the car battery ?
A :We have 1 year, 2 years , 3 years warranty time for different batteries based on different target markrt .
Q: Can you print my picture or logo on the battery cover ?
A: Yes, OEM is available,we can print your picture or logo on the battery case when we have your authorization .