1. 20 years brand and experience for manufacturing
2. ISO9001:2008, BV, ROHS, SGS, etc.
3. short production time
water type chassis guarder , rubberized undercoat, water based undercoat, rubberized undercoat (water based)
safety and environmental protection
low toxicity and tasteless
sound and heat proof
acid & alkali bearing
leak stop and repair
1. low toxic&irritation, tasteless, High safety performance
2. Super good adhesive force, firmly stick on car bottom, provide long effective protection to car bottom metal
3. high flexibility, impact resistance, reduce the colliding damage from road sand and stone for car bottom
4. high highflame retardancy, anti-static
5. dance paint coating will greatly decrease noise caused by tire and road
6. short time for drying, convenient operation
Application Range -
Can be used to all veihcle underpan, fender trim, inside of fender, fender-guard, out side of oil tan, trunk, etc.
1. Lift the car, dismantle tire and mud plastic proof board.
2. Clean the base area thoroughly, which should be clean dry and free of dust, oil, grease and wax, etc.
3. Cover the other parts tightly
4. Spend two minutes to shake the can evenly, open the lid, remover the seal and insert the special designed spray gun onto the mouth, collect the 0.6-0.8MPa comprssed air, finally spray onto the surface at a distance of 25cm.
5. To avoid the flow line or sagging, three times spraying are needed. After the first time spray, flatten and fill the cracks and caves with metal seal-glue. Every interval should be not less than 15 minutes, best noise deaden effect need more than 1.5mm thickness.
6. Before drying, petrol is allowed to clean.
1. Do not mix this product with oily undercoat
2. Do not use when temperature is lower than 5 degree centigrade or humidity is higher than 85%
3. Store in cool, shady, dry, and ventilated area
4. If contact eyes, flush immediately with a lot of water