8 working days for a 20 feet container or less than 10KM.
1KV XLPE insulated electric Cable.
2. strong production ability.
3. Product's range is large.
4. Quality is good
Name: 1kv XLPE Insulated Electrical Power Cable
Power cable: Suitable for underground power transmission. Building electricity's transmission and distribution. power cable with high quality and competitive price.
Insulation Material:XLPE or PVC Sheath Material: PVC or high density PE Armoure type: Steel tape or steel wire. Conductor Material: Aluminum or copper or copper clad aluminum wire
No. of cores:1,2,3,3+1,4,
Cross-section area: single core's area range from 1 to 400 or630 mm2 Thickness of Insulation:0.7~1.8mm
Model & Application:
Cu or Al conductor XLPE insulated PVC sheathed power cable
For laying indoors and outdoors. Able to bear certain traction during installation, but not external mechanical forces. Laying single core cable in magnetic ducts is not allowed.
Cu or Al conductor XLPE insulated PVC sheathed internal steel tape armored power cable
Suitable for laying indoors, in tunnels, in pipes and underground, able to bear external mechanical forces but not to large pulling force. Single-core cable can not be used in A.C circuit.
No. of Cores
Nominal section Area
The subscription "22" represents Power Cables with steel tape armoured type.
Also there are "32" and "42", represents steel wire armoured type and aluminum wire armoured type.
1. Max. rated temperature:
The max. working temperature of the coresshall not be exceed 90°C.
The temperature of core shall not exceed 250°C at short circuit for 5 seconds.
2. Installation requirements:
The installation is not limited by the level difference along the route.
The ambient temperature should not be below 0°C during installation.
The minimum bending radius shall not be less than 10 times of the cable’s outer diameter when laying.
Rated Voltage of Cable
D.C. Resistance of core
Compliance with IEC228A-82
Power Frequency withstand Voltage Test for 5 minutes
No Breakdown at 3.5kv
Hot set test for insulation, 200C 15min with pressure 20N/cm2 Max. Elongation at load, no longer than
Max. Permanent elongation afer cooled
Power Frequency withstand Voltage test for 4 hours, no breakdown
Wuhan Head Office:
Guangdong High Voltage and Aluminum Alloy base:
Guangxi Raw Material Base:
Environmental friendly applied:ISO14001
Quality management system ISO9001:
High-tech application base register:
Wuhan Shuangli Electric wire & Cable Co., Ltd. is your most reliable power cable manuefacturer in China. With over 25 years of experience in the power cable industry we can provide you stable high quality power cables. Whether you are looking for AAAC, ACSR, ABC, or electric wries and cables, WUHAN SHUANGLI can proficiently handle all of your needs.
Our goal is to assist you in every aspect of meeting and exceeding your goals and projecting. We care not just about your demand but also our own. Our ability to build long term relationships with our customers has been achieved through our commitment to total customer service and satisfaction.
Please take a moment to browse through our site (www.shuanglicable.com) to learn more about our company and the our products that we can provide you. If you have any questions or comments, please feel free to contact us. We look forward to hearing from you.
Wuhan Shuangli Electric Wire and Cable Co., Ltd was established on 1989 to produce various Wires & Cables over 20 years. Our main products is including Bare Wires, Electric Wires and Cables for Electric Equipment, Power Cable, Control Cable, Insulating Cables, and so on .
After 22 years' strong development, Shuangli now have two production bases, one is Wuhan Shenjiaji low voltage cable production base(Wuhan Shuangli Electric Wire and Cable Co.,Ltd) and another is Guangdong fo...