Product Series: TYT Organic Silicone Model : 2013 Clear Silicone Adhesive Sealant TYT-888A
1. TYT-888A is the silicone sealant of one component,neutral room curing,high modulus and easy to use. 2. Good elasticity, good resistance to aging. 3. Strong displacement endurance capacity, superior bonding property. Application:
1. Suitable to the structural bonding and installation of glass in building curtain walls. 2. Suitable to the bonding between large flat glass structure and aquarium. 3. Suitable to the bonding of glass joints in the skylight canopy glass curtain walls.
Color: white, translucent, black,silver grey and other colors as customers request;
1. Be sure to the applicability of products by compatibility test before use. 2. Not suitable for the structural assembly. 3. Not suitable for the underground joints for a long time. 4. Not suitable for the materials surface with grease, plasticizer or solvent. 5. Not suitable to use in non-ventilated place,which needs moisture in air to solidify. 6. Not suitable for frosting and humid surface, soggy or humid places all the year round. 7. It’s acid cure silicone sealant, which has a corrosion on concrete,marble,granite,coated glass,mirror glass,insulating glass ,galvanized material,metal etc. 8. Not suitable to use when the temperature of the materials surface is lower than 5°C or higher than 40°C. Packaging: 240ml/Cartridge, 24 pieces/Carton
Storage: be kept in a dry, shady and cool place below 27°C and the quality guarantee period is over 12 months from the production date. Attention: 1. Construct in environment with good ventilation; 2. Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor. Instruction: 1. Clean the base material with cloth; and clean it with solvent; 2. Then cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to fill the joint and tightly stick to the base material. Technology Data:
The following data are only for reference purpose, not intended for use in preparing specification.
Performance Measured Value Test Method Density /mm ≤ 1 GB/T13477 Extrusion (ml/min) ≥ 80 GB/T13477 Skinning Time /min ≤ 20 GB/T13477 Quality Loss /% ≤ 8 GB/T13477 Elastic Recovery /% ≤ 88 GB/T13477 Tensile Modulus /Mpa (23°C) ≤ 0.4 GB/T13477 Tensile Adhesion No damage GB/T13477 Bonding after UV-irradiation No damage GB/T13477