Product Series : TYT Organic Silicone Model : Fast Dry Silicone Sealant 9600
Features: 1. TYT-9600 is the silicone sealant of one component,neutral room curing and high strength. 2.Fast cure,small specific gravity,save time,clear,translucent,invariant color, specially for the bonding and sealing of glass. 3.In the usual climate condition, its life can be up to 30 years above because of excellent weather ability.
Application: 1.Suitable to the installation and sealing of car glass,aquarium,large flat glass,daylighting roof,aluminum alloy etc. 2. Suitable to the bonding and sealing between glass and glass or other materials. 3. Suitable to the bonding and sealing between glass and all kinds of doors & windows. 4.Suitable to the joints,bonding and sealing of a large of building materials, such as, ceramic,paint surface,glass fiber,non-greases timber.
Restriction: 1. Be sure to the applicability of products by compatibility test before use. 2. Not suitable for the structural assembly. 3. Not suitable for the materials surface with grease, plasticizer or solvent. 4. Not suitable to use in non-ventilated place,which needs moisture in air to solidify. 5. Not suitable for frosting and humid surface, soggy or humid places all the year round. 6. Not suitable to use when the temperature of the materials surface is lower than 5 ° C or higher than 40 ° C.
Color: black,clear and other colors as customers request;
Packaging: 240ml/cartridge, 300ml/cartridge, 24 cartridges/carton; 590ml/sausage,20 sausages/carton
Storage: be kept in a dry, shady and cool place below 27 °C and the quality guarantee period is over 10 months from the production date.
Attention: 1. Construct in environment with good ventilation; 2. Keep uncured silicone sealant beyond children’s reach. If getting into eyes, wash with running water for several minutes, and then consult a doctor.
Instruction: 1. Clean the base material with cloth; and c lean it with solvent; 2. Then cut the nozzle and press glue gun ,balance the glue to the both sides,ensure to fill the joint and tightly stick to the base material .
The following data are only for reference purpose, not intended for use in preparing specification.
Performance Measured Value Test Method Density /mm ≤ 1 GB/T13477 Extrusion (ml/min) ≥ 80 GB/T13477 Skinning Time /min ≤ 30 GB/T13477 Elastic Recovery /% ≥ 80 GB/T13477 Tensile Modulus /Mpa (Standard Condition) > 0.4 GB/T13477 Tensile Adhesion No damage GB/T13477 Bonding after Hot Extrusion and Cold Draw No damage GB/T13477 Bonding after UV-irradiation No damage GB/T13477 Tensile Adhesion after Immersion in Water No damage GB/T13477
Show our factory:
Sample Testings in Lab:
Start the production line before a series of strict sample testings by advanced machines. Such as,Tensile Strength Test,Shore-A Hardness Test,Skin over time Test and so on.
Container Loading Show:
Show our certifications and testing reports: Of course, we can provide others certifications to you if you need,such as SGS/MSDS, our silicone sealant products have been passed by ISO 9001:2008 and CNAS etc.