|Type:||Headlight||Voltage:||12V||Lamp Type:||HID Xenon|
|Certification:||RoHS/ISO9001/CE/FCC||Car Make:||universal||Place of Origin:||China (Mainland)|
|Brand Name:||GHY||Model Number:||C03||color:||black,silver,golden|
|Design:||Riot control, heat dissipation design||Optical source:||High beam||Unit box size:||320*220*70mm|
|Delivery Detail:||order go out within 3-5 working days|
2) Never exceed 1% defective rate
3) 4 hours aging test
4)Over 3000 hours lifespan
Usage: High Intensity Discharge
Resistant:Shock Resistant, Waterproof
Protection:Short Circuit and Open Circuit Protection
Matched Tube:H1, H3, H4, H7, H9, H11, 9005, 9006, 9007, D2r etc.
Input voltage range: 9 - 18V DC
Efficiency: >82% (stable)
Switch time: 500000times
Stable working voltage and power: 12V, 35W+/1W
l Submitted test as below:
1) Connection circuit protection test
2) Over voltage protection test
3) Flash light concussion test
4) Quakeproof capability test
5) Cold, warm boot test
6) Polarity protection test
7) Short and circuit protection test
8) EMC anti-jamming test
l Production process
l Xenon lamp installation steps
lMore choice for you:
----Different colour temperature:
3000K: Gold light. Strong penetrating power, suitable for fog day, often used for fog lamps.
4300K:Yellow light. Similar to ordinary light, strong penetrating power.
5000K: White light with slightly yellow. Strong penetrating power.
6000K: White light. Like the noonday sun. Visual comfort, it is one of the best site combining penetrating and comfortable. (If the customer do not do special choice, we recommend white light 6000 k color temperature).
8000K: White light with slightly blue. Penetration is weaker than 6000 K, suggest not to use more than 8000K light bulb.
10000K: White light with blue. K number is higher, the light is more blue, penetration of fog days is weaker
12000K : White light with blue and purple
HID ballast: Our ballast is different from other DC ballast. The ballast will change direct current into alternating current (AC), makes the light bulb under the AC power to do more stable work, and our company adopts the
current leading digital chip, intelligent control lights, effectively increase the service life and stability of the bulb
The input voltage: Input voltage range up to 16 v, apply to all kinds of car models the market;
Automatic outage system: When the accident or short circuit occurs, the system immediately cut off the circuit to avoid the danger of high voltage electric shock.
Sealed waterproof design: To solve the water leakage danger of short circuit for you.
Operating temperature range: 40 °C to 105 °C below zero.
1,Don't install the ballast beside the heating element ,the ballast can be installed on the bumper in general , it will help the heat dissipation.
2,Don't install the ballast beside some wires, Don't install near water; Such as near the water tank. (Excessive moisture will lead to leakage of electricity and aging)
3,Make sure the location of ballast is permeability , the flowing air reduce the temperature of the ballast . After installation, the relays of wire resistance and fuses will be come out, convenient to replacement
4,High tension line of the ballast is not easy to wind, avoid to produce big magnetic field and the influence of other auto electrical equipment. The wiring position of ballast is down.
5,Ensure the light bulb seal after installation.
6,When installing, special wire resistance may beautiful, don't connect to the heating element, in order to avoid excessively high temperature wire short circuit breakers.Using cable tie fasten, don't contact with mechanical movement parts, don't cause unnecessary connection
7,Each interface, fuse, With a good electrician tape strapping, to avoid produce loose leading to poor contact,
8, When the lamp is installed,if one side not bright, Or flash, usually to adjust the negative pole of the special quad
9, When install the type of H4, if the light is not bright, Or flash, Check the H4 terminal cathode have match,
usually it divided into two kinds of a + + -,and - - + ,then the good match will return to normal.
10, Sometimes the frame is anode, the ballast must be to package the jedi,and the ballast is ok.
11, After installation, If there is no installation of private sidings, in order to avoid too large current when starting
the original car fuse fusing, it must be replaced the original car control fuse with more than 20Ann