2014 hot sale 0.8mmpvc TI zipper Transparent inflatable auqa bubble
For more detials:
Inflatable Walking On Water Ball
2cm wide welding by American Welding Machine .
98cm standard TI zip/Germany Zipper
0.8mm/1.0mm thick PVC or 0.7mm/1.0mm thick TPU.
2m(6.6ft) \ 2.5m(8.6ft) \ 3m (9.4ft)...Diameter as you want.
Clear(Transparent),Red, pink, Blue, Green, Black,Yellow,Orange, Purple.....
Bag + carton
CE or UL air blower.
by express or by air or by sea .
3 to 5days or a week....(depends on quantity).
TT Bank or Western Union
swimming pool, beach, water park, lake, river,shoaling water,Advertising display etc.
How to use Water Balls
1 Always make sure that the product is safe and in good condition before use.
2 Remember to lubricate the zip with silicone before use, and to lubricate the zipper every 10th time.
3 Make sure that all safety equipment is tested and found usable before use.
4 Always instruct the user how to use a TIME-OUT signal.
5 The user climbs backwards into the ball through the zipper-opening .
6 The zipper is closed so that there is an opening of 10 centimetres then the ball is inflated by a special pump or blower.
7 Close the zipper completely when the ball is fully inflated.
8 Note that for safety reasons is not possible to open the ball from the inside.
9 When the ball is fully inflated and closed, be assure that the zipper is closed before entering the water, gently and carefully.
Remark for water balls
1 Please use it as a toy but not tool walking on water.
2 Please use it with a controller.
3 Donn't use it on river,sea or lake without the safety string attached to a controller.
4 Use it within 10 munites at one time.
5 Keep it dry when in stock and away from sharp tools ,fires and chemicals.
6 Better to use lubrication oil for the zipper Before use the ball.
Remark for Zipper
1 The zipper is not indestructible and can be damaged via improper use.
2 Always examine the zip before and after use.
3 Make sure that the zip is lubricated before, during and after use.
4 Clean the zip regularly, removing dirt, small stones, hair, clothing etc.
5 Never force the zip, if the zip is hard you are not using enough lubrication.
6 Store the zipper closed to protect the zipper.
7 If the zip splits behind the zipper, you are not using enough silicone or pulling. the zipper to hard/wrong, simply pull the zip back, lubricate and close the zip again.
8 If this problems recurs, you should temporarily take the ball out of use and make sure that the zip is cleaned and lubricated before using again.
Welcome to visit our facotry .