GPS position Automatic navigation Automatic return home Hull type: dual hulls; dual propellers Fish-attracting lamp, indicator lamp, and night lamp Anti-weed design internal propellers Boat size: 68*55*28cm Weight: 7.2kg (includes lithium batteries) Power: two pieces 6.4V 10Ah LFP batteries Boat color: Black, Orange Control distance: around 300 meters on the water The capacity of hoppers: 2.0KG * 2 No-load speed: 80 meters/minute Electronics compass + satellite GPS, deviation less than 5 meters Drive system: dual high-power 550hp motors. GPS + Beidou modes for saving eight target points Actions: go forward, backward, turn left, turn right, bait feeding, hooks releasing Action time: 1.5-2.0 hours Charging time: 12 hours for 10Ah battery Sonar fish finder: Yes Sonar beam angle: 20 Ultrasonic detecting water depth: 0.5~32m Detecting water depth resolution: 0.1m Low power alarm function: Yes Water temperature detecting range: 0~50.C Unit conversion: meter/ft; centigrade/Fahrenheit GPS precision: 5m GPS orientation time: 1~5mins Current longitude and latitude display: Yes Distance measure function: Yes Remote controller: The remote controller recognizes the receiver ID code Controller monitor: FSTN 128*64 pixel 59mm*36mm Controller power: 4.8-6.0V 4 AA dry cells Controller frequency: 433Mhz Controller power: 15dbm Working frequency: 2.4Ghz
GPS features instruction: (1). It is essential to set home point: Users should set home point before using; first power on the handset and power of the boat, then put the boat in the water by the river bank. Make sure the front light faces to users, after 1-3 minutes, press “forward” key, motors will work. The front lights flash three times means the home point is set successfully. The home point is the boat will return to during the boats GPS features. The home point is set automatically once the power is switch on by the GPS on the boat. Front lights flash to remind users of the position of the home point. (2). Electronics Compass: Users should check the electronics compass when first time use the bait boat: after home pointed is set, users should remote control boat to leave river bank within 5-10 meters, then press the left key and make the boat rotate anti-clockwise 1-2 circles. After this operation, press the right key to make the boat turn clockwise 1-2 circles, after the above two steps, the check of the electronic compass is finished. (This step is to improve the boat GPS accuracy) When the boat is used in the same water area, users need to check electronics one time. (3). Make sure the memory point: When the boat moves to the bait point, users could save it as the memory point; press the releasing bait key and “F” key immediately, the boat could save this point. After this operation, the boat will return to home point automatically. (if users do not press “F” Key immediately, the boat will return to bait point automatically.) (4). One-Button Press GPS: When users want to release at the same bait point, he needs to press “F” key and boat could go there automatically and release bait or hook, after releasing the bait, the boat also could come to the home point. All operations are finished automatically.