260W 220VAC 36Vmp Solar Panel IP65 Waterproof & Communication Function Pure sine wave grid tie Micro inverter home use
Features: · AC input range selectable by switch · Protections: Short circuit / Overload / Over voltage · Cooling by free air convection · 100% full load burn-in test · Low cost · High reliability · 1 years warranty
Product Model SY-WMVC-260Watt Recommend use solar panel 36V/240Wp Max.DC Input Current Automatic control Max. DC Input power 280Watt DC Input Voltage Range 22-45V DC Output Power Factor >98% DC Over-Voltage Protection FUSE AC Output Voltage 230V (190-260V) AC Frequency Range 50Hz/60Hz (Automatic detection and adjust) The Total Harmonic distortion THD<3% Phase Shift <1% Islanding Protection Vac, Fac Output Short Circuit Protection Fuse Standby Power <2W Work Temperature Range -25 -60°C EMC EN61000-6-3:200 EN61000-6-1:2007 Grid Disturbance EN 50178+EN 62109-1+VDE0126-1-12 Grid Detection DIN VDE 1026 UL1741 Stable conversion efficiency 92% certifications CE Certificate
SY-WMVC-260W Waterproof Micro inverter Application Field:
A Micro inverter installation 1 Connected the positive terminal and negative terminal of the solar panel to the corresponding terminal of the inverter.
B Micro inverter stack using
In order to meet the requst of achieving a higher power, this item can be stacked. For example: five pieces of 260W inverter stacked equal to 6300W, and the quantity of stacking is not limited.
Notes: ---Please pay attention of the voltage when use the product. The voltage is from 22-45V, if is not these voltage the product may broken. ---Recommended Maximum DC input 4AWG cable capable of handling more than 15A of the cable size. ---Optimal length of the DC input line 8M or less, long cable will allow solar panels to the inverter DC voltage drop caused by wear and tear. ---Connected to a power outlet to provide AC ---Connected solar panels, battery or wind generators DC input DC power supply cable. ---Proposed wind power plant with its own charge controller and load dump. Installation Connection 1.Connect DC positive, black terminal: Connect DC negative. 2,AC socket: Connection to the mains. The AC cord to the inverter 3 foot outlet, then the AC cord to home 3PIN AC outlet. 3,Switch: power properly connected, turn on the switch, the inverter to work.
C CE/ISO certification
D Payment & Freight
E Contact Us