Full Cargo trailer (1front+2rear axles with drawbar and turntable)
Heavy duty and extra durability designed; Opting for high tensile steel Q345B,welded by automatic Submerged-Arc processes 450mm Height I beam, Top Flange 14mm,width 140mm; Middle Flange 6mm ;Bottom Flange 16mm,width 140mm
Steel Sheet 3mm thickness
Three Units of FUWA(band) 13 ton axle
A couple of FUWA(band) mechanical 1+2-axle suspension
Six sets of 8-piece leaf spring,16x90mm
One unit of 15Ton turn-table
One unit of drawbar with 50mm towing eye, Type 100
13 units of 8.25R22.5 rim
13 units of 11R22.5 tubeless tyre
Four nos. of ISO standard up-down twist lock for 1x20ft,the locks can be laid down.
Spare Wheel Carrier
One set of spare wheel carrier including a riser.
Pneumatic Braking System
A system with emergency brake and parking brake;
Dual line ,air brake, piggyback spring on all axles;
Two units of WABCO RE 6 relay valve; four units of T30/30 spring brake chamber, two units T30 brake chamber; two units of 40L air tank ; two units of standard copper air-connector.
One unit of JAEGER POWAY ,24V 7-pin ISO standard 1185 socket; two sets of standard rear light, turn light, rear reflector, side light, side reflector etc.
One set of 6-Core standard Cable.
Sand blasting before painting
one coats of primer, anti corrosion
two coat of finishing painting
Colour as customer choice
One box with a set of standard trailer tool
For the specification above , we reserve the right to make any changes without notice.