1.one part sealant
3.No need primer, easy to use
4.Non-corrosive or pollution to base
material and environment
1.TECHNICAL DATA SHEET
Shore A hardness
Tensile strength( Mpa)
Elongation at break (%)
Volatile content (%)
Touch Dry time(min)
Application temperature(degree C)
+5 -- +35
KASATAR112 is one component high quality multi-purpose polyurethane sealant, it cures by reaction with atmospheric moisture to form a durable and weathering resistant elastomer, KASTAR112 is manufactured in accordance with the ISO/TS 16949:2002.
Suitable for automobile windshield and side glass installing.
Suitable for car body structural bonding and sealing.
Clean and dry all surfaces by removing foreign matter and contaminants such as oil dust, grease, frost, water, dirt, old sealants and any protective coating. Dust and loose particles should becleaned.
*310ml cartridge, 20 pcs/carton
*600ml/400ml sausage, 20 pcs/carton
Minimum application temperature: 5°C.
KASATER112 should be dispensed from either the cartridge or sausage by means of a caulking gun. Pierce the membrane at the top of the cartridge and screw on the nozzle. Cut nozzle to give the required angle and bead size. Place the cartridge in an applicator gun and squeeze the trigger. For sausages, a barrel gun is required, clip the end of the sausage and place in barrel gun. Screw end cap and nozzle on to barrel gun. Using the trigger extrude the sealant, to stop depress using the catch plate. Apply RENZ 20 in a continuous bead using enough pressure to properly apply the sealant.
*Safe Drive Away Time in as little as two hours when used on vehicles with airbag.
* Modest Hardness and high tensile strength after curing .-
* Flexible, durable and excellent extrudability.
*Need no primer to glass
* No sagging, no pollution and corrosion to base material and environment.
* Excellent sealing and adhesion performance, excellent water and aging resistance.
*For common occasion, after cleaning out the surface with organic solvent, this product can be used directly.
*Please construct by application instructions strictly, failure of stickiness may be caused by any operation disobeying construction techniques.
*This product is innocuous after curing completely, but before set, please avoids contacting with eyes and skin. In case of eyes and skin contact, wash immediately and thoroughly with soap and water. See doctor immediately if it is serious.
Shandong Yulong is a professional manufacturer and exporter that is concerned with the design, development and production of silicone sealant, silicon sealant, acetic silicone sealant, acetoxy silicone sealant, acid silicone sealant, two component silicone sealant,neutral silicone sealant, structural silicone sealant, rtv silicone sealant, glass silicone sealant, weatherproof silicone sealant, liquid silicone sealant; acrylic sealant, acrylic silicone sealant, siliconized acrylic sealant, ... View detail