US $600 - 2000 / Set1 Set/Sets
US $800 - 2000 / Set1 Set/Sets
US $850 - 1000 / Set1 Set/Sets
|Max. Rim Diameter:||
|Max. Rim Width:||
|Max. Wheel Weight:||
|Place of Origin:||
|Delivery Detail:||according to the quantity|
3D Wheel Alignement
1.Advanced 3D processing
3D wheel alignment 903D
2 group of industrial camera (take photo)+four target panel(reflect image) +special software
push the vehicle:
push the vehicle forward and rearward 12-18cm (or 30-40o) to complete the measurement and eccentricity compensation.
rotate the wheel:
lift the vehicle up to the height of the wheel leave the ground and rotate the wheel 30-40o to complete the measurement.
Push vehicle indication:
* direction: push the vehicle as per the arrow indication.
* distance: indicate the push distance through the timely changing data show on the screen
* status: indicate the operator that the measurement is completed through the animation “Stop” and the word "complete pushing vehicle”
* the distance between the camera and the distance of the target panel center allowed to be in the arrange of 2.450mm-2.750mm.
*suitable for the wheel of 13”-22”
* search the target panel through adjusting the height of the camera manually.
* raise the lift to adjust the target panel into the optical field.
* 25000 vehicle data covering most majority of the main vehicle model around the world.
*vehicle data update is synchro with Autodata, which is complete, correct and reliable.
* display the data with the unit of degree, degree and minute, inch, mm.
* quick search the vehicle model as per letter order, manufacturer, model and produce year.
* obvious and dynamic interface, with picture and essay, which will guide the operator, and make the operation easier.
* the operation video is available to be loaded and instruct the operator to use correctly.
* the 3D animation of adjusting and the real vehicle adjusting video is available to be loaded to be the reference to the operator.
* with the function of the independent menu of diagnosis and maintenance, assure the using efficiency of the equipment.
* the quick measurement could be carried out by shortcut menu.
Stability: the optical sensors were replaced by advanced technology and mature spare parts, therefore, the stability of 3D wheel alignment will not be affected and interfered by electricity, circuit, strong light, temperature, battery and voltage.
Reliability: compare the measurement principle, laser is point, CCD is line, 3D is side, measurement result of 3D is much more reliable.
Function: effectively measure front and rear toe, camber and camber difference, KPI, caster, set-back, and thrust line angle.
Voltage: 110/220V ±10V, 50HZ ±1HZ, independent power supply, must be earth connected.
Spare parts package