About 2959 results:
Wheel Alignment (2124) , Car Lifts (1)

3D wheel alignment machine HC3D212

FOB Price: Get Latest Price
Min.Order Quantity: 1 Set/Sets as per your specific need
Supply Ability: 15 Set/Sets per Month
Port: Shanghai
Payment Terms: L/C,T/T
Add to My Favorites

Quick Details

Place of Origin:
Shanghai China (Mainland)
Brand Name:
hoton
Model Number:
HC3D-212
Total toe-in:
0~±20°
Camber:
0~±8°
Caster:
0~±20°
Kingpin Inclination:
0~±20°
Maximal wheelbase it can Measure:
5330mm
Requirements on ambient temperature::
0~50℃
Requirements on Relative humidity:
≤85%

Packaging & Delivery

Packaging Detail: Normal firm export playwood packing and packaging
Delivery Detail: as per your target order quantity

Specifications

1.3D digital measure
2.Durable target reflectors
3.measure 5-meter wheelbase
4.dynamic measurement
5.3D measurement

-- 3D digital camera measurement system: two 3D digital cameras, four targets
--  Target Features: There is no electronic components on the target, without data transmission,

--  no batteries facilitate the complete elimination of circuit failure. The product is more stable 
--  Equipment Calibration: Equipment calibration is done once only when the installation is complete, which is not necessary to regularly repeat.
--  dynamic measurement: dynamic measurement based on pushing. Without raising its body, the vehicle is at a natural state. Simultaneous detection of four wheels would reduce measurement time and improve the accuracy.

Software system: simple operation, to read the basic wheel alignment data within two minutes.
-- Low demand for horizontal level of lift: for the list, the levelness difference of 5cm or less has little impact on the measurement results, different from the traditional technology  with over-reliance on gravity optical platform levelness degrees. 
--  all-model measurement: it can detect long body, low chassis vehicles. 
--  maintenance: Maintenance is simple, the device doesn’t need periodic calibration. 
--  Standard components :
1: Two cameras, beams and high column in line with cabinet, 2: famous-brand computer, 3.27-inch LCD monitor, 4. A4 printer, 5. big and small targets 6. clamps: 12 "-22", 7 brake pedal holder, 8. Steering wheel holder, 9. Wedge-shaped pads, 10. turnplates 

 

--  3D digital camera measurement system: two 3D digital cameras, four targets
 Target Features: There is no electronic components on the target, without data transmission,

-- no batteries facilitate the complete elimination of circuit failure. The product is more stable 

--Equipment Calibration: Equipment calibration is done once only when the installation is complete, which is not necessary to regularly repeat.

-- dynamic measurement: dynamic measurement based on pushing. Without raising its body, the vehicle is at a natural state. Simultaneous detection of four wheels would reduce measurement time and improve the accuracy.

Software system: simple operation, to read the basic wheel alignment data within two minutes.
-- low demand for horizontal level of lift: for the list, the levelness difference of 5cm or less has little impact on the measurement results, different from the traditional technology  with over-reliance on gravity optical platform levelness degrees. 

-- all-model measurement: it can detect long body, low chassis vehicles.

--maintenance: Maintenance is simple, the device doesn’t need periodic calibration.
   Standard components :
1: Two cameras, beams and high column in line with cabinet, 2: famous-brand computer, 3.27-inch LCD monitor, 4. A4 printer, 5. big and small targets 6. clamps: 12 "-22", 7 brake pedal holder, 8. Steering wheel holder, 9. Wedge-shaped pads, 10. turnplates

 

-----------------------------------------------------------------------------------------------------------------------------------

 

 

      The advantages of Hoton 3D wheel aligners compared with the ones of other brands

 


(1) the measurement differences between 3D and CCD

 


       3D principle: First attach the targets to the tyres; the camera in front of the car then extract the location signals of the targets; the wheel aligner can tell the angles of tires after computer processing.
       CCD principle: First attach the locating sensors to the tyres; the location signals can be tranmitted by wireless system(mainly bluetooth);the wheel aligner can tell the angles of tires after computer processing.
       3D advantages: convenience, long life, little breakdown possibility, low repair cost. At present, repair shops are usually dirty and messy, and thus the traditional CCD electronic equipments are more prone to failure, easily broken by a throw, and need to be charged often. Compared to 3D models, CCD models require higher operating cost. Nowadays more and more customers choose to use 3D wheel aligners with measurement accuracy and stability far better than CCD ones.

 


(2) the advantages of Hoton 3D wheel aligner compared with the ones of other brands,

 


  technology advantages:
   1.1
:advantage one: by adopting high precision industrial digital camera, it can measure a wider range, and be of anti-light interference.
        we adopt the same brand 3D camera as that used in imported 3D brands, with high resolution, high precision and wide angle measurement. Both cars and off-road vehicles can be measured. No matter what the lighting conditions are, it can guarantee the accuracy. By contrast, 3D wheel aligners of other brands adopt domestic cameras, which are useful for cars only. They are impossible for superwide off-road vehicles unless you add money to lengthen the beams.

 


     1.2
:advantage two: fast data changes without any delay.
        We adopt Front-end CPU processing. As soon as the camera receives the image , it begins pre-processing, by removing useless information and sending useful information for processing to the computer through high-speed USB port, so the screen data changes consist with the vehicle changes without any delay. By contrast, 3D wheel aligners of other brands don’t have data preprocessing step. The data just directly goes to the computer processing. As the computer processing is slow, its reaction speed to the car adjustment is slow too.
    1.3
:
advantage three: High-precision targets and long-life clamps.
        We adopts imported reflective materials from U.S. to ensure the accuracy and long lifespan of the targets. Also we use thicker and wearable clamps to ensure reliability of the whole equipment. By contrast, wheel aligners of other brands still use early CCD clamps, which easily deform to result in easy data change.

 


    1.4
:advantage four: all-sided functions; cheap price
       Adding a little fee, you can enjoy being able to measure same parameters as abroad. Foreign 3D has multiple versions, and the price is very expensive. Besides the conventional parameters (toe, camber, SAI, KPI and toe-out-on-turn), called tire angle data, it can also measure(Expert Edition): wheelbase (even many 3D models don’t have this feature), wheel declination angle, Tread, lateral offset, chassis diagonal, etc, called chassis data. 
  
       Currently the technology of HOTON 3D wheel aligner is mature, and we always enjoy a good reputation among customers at home and abroad. We rank far ahead in sales compared to other brands. I hope you’ll not miss this. HOTON brand, assure you of the quality.
 

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>
Shanghai Hengchen Auto Equipment Co., Ltd, founded in 2004, is an integrated enterprise for production, distribution, export and wholesale in auto maintenance equipment line. It is located in Malu Hope Industrial Park of Jiading District, Shanghai City. It manufactures tyre balancers, tyre changers, 4 wheel alignment machines, mobile bus lifts, and paint booths by itself. Meantime it owns general dealerships in whole East China for Doocar auto body collision repair benches, Fly-Eagle plate ... View detail

Basic Information

Product/Service (We Sell): Tire Changer,Wheel Balancer,Auto Code Reader  
Brands: HOTON  
Number of Employees: 11 - 50 People  

Trade & Market

Main Markets: Western Europe
Eastern Asia
South America
Eastern Europe
Oceania
Mid East
North America
Southeast Asia
Northern Europe
Africa
Total Annual Sales Volume: US$10 Million - US$50 Million  
Export Percentage: 61% - 70%  

Supplier Assessment Report

Do you want to know more about this company before you make a deal? Request an Assessment Report.
Supplier Assessment Reports are detailed on-line reports about the supplier's capabilities. It helps you get all the information you need to trade confidently with suppliers.

Send your message to this supplier

Sourcing Products & Suppliers on Alibaba.com

Search Products
Enter the product you are looking for in the Search Bar and click Search
Contact Suppliers
Click Contact Now to send an inquiry or I’m online, Chat now to chat online
Check Messages
Check quotes & messages from suppliers in your email inbox or Message Center
China (Mainland) | Trading Company | Contact Details
Experience: Established 2005

Communicate with Supplier:

Mr. ruilin zhong
Mr. ruilin zhong:
What can I do for you?
Not exactly what you want?
1 request,multiple quotations Get Quotations Now >>