Cleaning the greasy dirt, water stains and dust of the spraying parts thoroughly.
Filling up hollow part with the atom ash and rub down.
Shaking the can about 2 minutes before the spraying and make sure it mix well.
Pressing the nozzle with your forefinger and spraying the surfaces at a distance of 20 to 30cm with a constant speed.
You can spray several times, the performance effect is better than one thick coating if you spray thin coating every two minutes.
After use, cleaning the nozzle by reversing the can and pressing the nozzle for three seconds in case of clogging before you store it.
Trial spraying on small area of unknown materials and it is workable if there are not adverse reaction after 10 minutes.
You must assure the can is straight while spraying and the angle is not less than 45 degrees from the horizon.
Please do not use in rainy or cold environment.
Please work in well ventilation condition and it is good for the spraying effect in cool and dry, dustfree environment.
Keep the can away from the children.
Please store it in cool place which the temperature is between0-40°C and keep it away from fire and heat sources. It is prohibited to expose the spray paints in sunshine or burning.
After use, reversing the empty can and pressing the nozzle to release the remaining gas, then put the empty can in safe place.
How to use:
1.completely remove the need to paint parts of the oil, water and dust.
2.Paint up and down, shaking the jar for about 2 minutes to spray mixed thoroughly.
3.Away from being sprayed surface of about 20-30 cm, uniform spray pressure nozzle back and forth with the index finger, the proposed construction to the number of times: three times, each construction interval 5-10 minutes is the best.