Zeolite molecular sieve 4A is able to absorb molecules with their critical diameters no more 4 angstroms(0.4nm)
Zeolite molecular sieve 4A is an alkali alumino silicate; it is the calcium form of the Type 4A crystal structure. Type 4A has an effective pore opening of 4 angstroms (0.4 nm). It will adsorb molecules with a kinetic diameter of less than 4 Angstrom and exclude those larger.
Typical Chemical Formula Na2O·Al2O3 ·2.SiO2·9/2H2O Application 1) Drying and removing of CO2 from natural gas, LPG, air, inert and athmospheric gases, etc. 2) Removal of hydrocarbons, ammonia and methanol from gas streams (ammonia syn gas treating) 3) Special types are used in the air break units of buses, trucks and locomotives. 4) Packed in small bags, it may be used simply as a packaging desiccant.
Size ratio up to grade
By carton box, each box 30kg or 25kg, inside airtight bag.
Or 40kg/sealed iron drum, inside airtight bag.
Regeneration Molecular sieve Type 4A can be regenerated by either heating in the case of thermal swing processes; or by lowering the pressure in the case of pressure swing processes. To remove moisture from a 4A molecular sieve, a temperature of 250-280°C is required. A properly regenerated molecular sieve can give moisture dew points below -100°C. The outlet concentrations on a pressure swing process will depend on the gas present, and on the conditions of the process
Size 4A - Zeolites are available in beads of 1-2 mm, (10x18 mesh) 2-3 mm, (8x12 mesh) , 2.5-5 mm, (4x8 mesh) and as powder, and in pellet 1.6, 3.2.