Applicable shipping medium
Curb weight (Kg)
Maximum load (Kg)
The total mass(Kg)
China FAW Group Corporation
Number of tires
The tank body is made of Q235B high-quality steel plate 3mm thick. The cylinder has an oval cross section. The tank body is connected with a secondary beam by welding and the secondary beam has a bolted connection with the primary beam. A dashboard for preventing liquid fluctuation is arranged inside the tank body; additionally, there is a manhole and cover, an oil feeding hole and cover, a pressure vent valve and an antiskid plate at the top of the tank body. There is an accumulated liquid tank at the low point of the tank bottom connected with a pump valve with steel pipes. A climbing stairway is arranged on the rear side the tank body and the manufacture of the whole tank body features the automatic welding technique and conducts control according to the requirements for medium pressure vessels.
Oil can be filled into the tank via the manhole of the gravitation tank and discharged by opening the lower valve. Gravity will make it flow. Oil can be filled into the tank as well and rapidly discharged with a pump. For details see operating instructions. The drift diameter of the system pipeline is 50mm and the flow rate of one set of the oil pumps is 250L/min. There are two three-way ball valves, two sets of quick-change connectors and two handling hoses 2.5m in length.( See attached diagram)
Sell oil system
This vehicle equates to small mobile gas station.There is a Charged fees refueling device ,a pipe that is 15 meters long and its diameter is 1 inch,a pipeline volume dish,a refueling gun. (See attached diagram)
The pump is mainly powered by an engine and is driven by a power take-off (PTO) and a transmission shaft; the operation of the pump is controlled by a pressure reversal valve inside the cab.
One pressure vent valve, one static electricity conduction device, one anti-static grounding belt, two fire extinguishers and one danger mark. According to national standards, a side protective plate, a rear protective plate and a bumper device are installed and there is a muffler in the front part as well as a signal system including height lights, width lights and turn signals.
One tool box and one pipeline valve box.
color is determined by customers.