Wind power generator passed ISO900l , CE and EN61400-2. 1. Wind power generator introduction 1) Pitch controlled technology Through centifugal pitch controlled mechanism, the system will stall control actively, has big angle for startup(good startup performance) rated wind speed point, zero degree(optimum wind rotor efficiency) over rated wind speed, minus angle(stall actively to wind rotor power for zero) The pitch controlled system closed-loop control according to the wind speed and rotational speed, to make sure the power curve output steady 2) ASP System ( automatical safety protection system ) Through checking the signal of wind speed and voltage, the ASP will make the wind turbine pitch control and then stop to protect the whole system when the wind speed is more than 25m/s or the voltage is over 600V; when the wind speed is lower than 25m/s, the system will release brake automatically to make the system start working again. Therefore, it can full use of wind power for power generation; meanwhile, it doesn’t need people on duty to save a lot of labor cost, safe and steady. 3) Multiple protection measures to make sure system much safer and more stable a. Modern virtual design technical way based on computer platform to guarantee product more steady; b. Based on analysis platform structure design, it makes the products more optimum and steady. c. Blade front edge “ sole” technical finish: reduce 10% wind rotor noise and anti-corrosion, prolong its service life effectively. d. Based on procedure control of product quality, it can satisfy with the customers’ requirements. e. Perfect fluent wind turbine breath system, avoid expanding with heat and contracting with cold, anti-condensated water, to make sure the system inner components no malfunction f. Streamline design for the tail vane, 30% stronger than traditional tail vane for the capacity of finding wind direction. g. Multiple carbon brushes to improve power-transmission safety factor, low malfunction rate and higher efficiency. h. Good seal for core parts to anti-sea water, wind and dust, rain, snow and fog erosion i. Hot galvanizing and powder coating for tower, nice appearance, anti-corrosion and safety 5) Use patented product-tilt-up tower, all terrain application, easy and simple, no need of crane, and low installation cost 2. Technical parameter
5kW Wind power generator Technical Parameter Rotor diameter (m) 5.4 Blade material and quantity Reinforced fibber glass*3 Rated power / Max power (W) 5000/6000 Rated wind speed (m/s) 11 Rated rotating speed (rpm) 260 Working speed (m/s) 3-30 Start-up wind speed (m/s) 2 Survived wind speed (m/s) 60 Working voltage (V) DC500V/DC240VAC220V Battery voltage / capacity (V, Ah) 20*12=240/200 Speed regulation method Pitch controlled Stop method Automatic safety protection system/Manual brake Generator style Permanent magnet, three phase, AC Wind turbine main body weight (kg) 400 Guyed tower height / weight (m/kg) 8/160 Tilt-up tower height/weight (m/kg) 8/350 Packing dimension (m3) 6.16CBM Wind turbine dimension D*L (m) Φ5.4*5.4 Noise level (decibel) ≤65dB 3. Application Farm, villa, Island, signal tower, remote area, industry, home, community, school and so on. Qingdao Anhua New Energy Equipment Co., Ltd. is a national high and new tech enterprise which specializes in small and medium wind turbine design and manufacture. More than 30 years, the company dedicates to small and medium wind turbine whole system R&D and popularization and accumulates rich experience in design and construction. ANE is relentlessly committed to researching and developing the safetest wind turbines for every customer and partnership. ANE wind turbine is famous for its outstanding characters as follows, 1. Safety and Stability: Double protection makes the wind turbine system running at different climate. 2. Huge Benefit: Including economical benefit and social benefit. 3. Leading technologies: Make Pitch Controlled System and automatically Electrical Brake System match perfectly at small wind turbine field. Now ANE has three series of products: 1. Diffused-type wind turbine AH-400W; 2. Yawing-size wind turbine AH-500W, AH-1kW, AH-1.5kW and AH-2kW; 3. Pitch controlled wind turbine AH-5kW, AH-10kW and AH-30kW. Every series of products achieve self-protection and running smoothly and safely at gale condition and extending their service life.