1. Packing plywood box and softpackage 2. Packing dimension: a. Generator and rotational body 1.85*0.92*0.9=1.53 b. Blade 2.6*0.33*0.25=0.22 c. Tail vane 3.64*1.04*0.27=1.02 d. 8m tilt-up tower 0.5*0.5*8=2.0
15 days after payment
1. Low noise
2. 2m/s wind speed startup
3. Dual protection system
4. CE and EN61400-2 passed
1) Pitch controlled technology
Through centifugal pitch controlled mechanism, the system will stall control actively, has big angle for startup(good
startup performance) rated wind speed point, zero degree(optimum wind rotor efficiency) over rated wind speed, minus
angle(stall actively to wind rotor power for zero) The pitch controlled system closed-loop control according to the wind
speed and rotational speed, to make sure the power curve output steady.
2) ASP System ( automatical safety protection system )
Through checking the signal of wind speed and voltage, the ASP will make the wind turbine pitch control and then stop
to protect the whole system when the wind speed is more than 25m/s or the voltage is over 600V; when the wind speed
is lower than 25m/s, the system will release brake automatically to make the system start working again. Therefore, the
system can full use of wind power for power generation; meanwhile, it doesn’t need people on duty to save a lot of labor
cost, safe and steady.
4) Multiple protection measures to make sure system much safer and more stable
a. Modern virtual design technical way based on computer platform to guarantee product more steady;
b. Based on analysis platform structure design, it makes the products more optimum and steady.
c. Blade front edge “ sole” technical finish: reduce 10% wind rotor noise and anti-corrosion, prolong its service life
d. Based on procedure control of product quality, it can satisfy with the customers’ requirements.
e. Perfect fluent wind turbine breath system, avoid expanding with heat and contracting with cold, anti-condensated
water, to make sure the system inner components no malfunction.
f. Streamline design for the tail vane, 30% stronger than traditional tail vane for the capacity of finding wind direction.
g. Multiple carbon brushes to improve power-transmission safety factor, low malfunction rate and higher efficiency.
h. Good seal for core parts to anti-sea water, wind and dust, rain, snow and fog erosion
i. Hot galvanizing and powder coating for tower, nice appearance, anti-corrosion and safety
5) Use patented product-tilt-up tower, all terrain application, easy and simple, no need of crane, and low installation cost.
2. Technical parameter
5kW Technical Parameter
Rotor diameter (m)
Blade material and quantity
Reinforced fibber glass*3
Rated power / Max power (W)
Rated wind speed (m/s)
Rated rotating speed (rpm)
Working speed (m/s)
Start-up wind speed (m/s)
Survived wind speed (m/s)
Working voltage (V)
Battery voltage / capacity (V, Ah)
Speed regulation method
Automatic safety protection system/Manual brake
Permanent magnet, three phase, AC
Wind turbine main body weight (kg)
Guyed tower height / weight (m/kg)
Tilt-up tower height/weight (m/kg)
Packing dimension (m3)
Wind turbine dimension D*L (m)
Noise level (decibel)
Farm, villa, Island, signal tower, remote area, industry, home, community, school and so on.
Qingdao Anhua New Energy Equipment Co., Ltd. is a national high and new tech enterprise which specializes in
small and medium wind turbine design and manufacture. More than 30 years, the company dedicates to small and
medium wind turbine whole system R&D and popularization and accumulates rich experience in design and
ANE is relentlessly committed to researching and developing the safetest wind turbines for every customer and
partnership. ANE wind turbine is famous for its outstanding characters as follows,
1. Safety and Stability: Double protection makes the wind turbine system running at different climate.
2. Huge Benefit: Including economical benefit and social benefit.
3. Leading technologies: Make Pitch Controlled System and automatically Electrical Brake System match perfectly at
small wind turbine field.
Now ANE has three series of products:
1. Diffused-type wind turbine AH-400W;
2. Yawing-size wind turbine AH-500W, AH-1kW, AH-1.5kW and AH-2kW;
3. Pitch controlled wind turbine AH-5kW, AH-10kW and AH-30kW.
Every series of products achieve self-protection and running smoothly and safely at gale condition and extending their
ANE has already passed ISO900l Quality Management System and the products have passed CE and
This information was Verified by TÜV Rheinland and is valid for the following period:
2014/05/30 --- 2015/05/29
The information below covers both the Gold Supplier and its related companies, which are defined according to china laws and regulations, and which will also be clearly displayed in the full report >>
The competitive advantage of product line:
Our company has passed ISO9001:2008 Quality Management System, ISO14001:2004 Environmental Management System and CE Certification. Anhua wind turbines have been exported to more than 80 countries, such as Denmark, Germany, France, Italy, Brazil and so on.
Scope: Design and Production of Wind Turbine, Sales of Wind Turbine Accessories and Related EMS Management Activates by Qingdao ANHUA New Energy Equipment Co., Ltd. Located at High-tech Industrial Park 1, No. 151, Zhuzhou Road, Laoshan District, Qingdao City, Shandong Province
Qingdao Anhua New Energy Equipment Co., Ltd. is a national high and new tech enterprise with 30 years experience and dozens of senior engineers and skilled technicians.
The factory is located in High Tech Zone, Qingdao, covering an area of 4000m2. There are advanced generator performance test, wind rotor balance debug, pitch control test platforms and other professional test platforms.
Seeing is Believing and we'd like to invite you to our factory for a visit.
ANE wind turbines adopt whole ... View detail