|Place of Origin:||Guangdong China (Mainland)||Brand Name:||WINTEK||Model Number:||WSE-075-5A00W|
|Output Power:||51 - 100W||Output Type:||
Single,Single output constant current
|Input Voltage:||90Vac -264Vac|
|Output Voltage:||8-15VDC||Output Frequency:||47-63HZ||Output Current:||5.0A|
Bulit in active PFC function, PF>0.95
|Customized dimmable type:||PWM||Components:||Infineon, TDK, Rubycon||Protections:||OCP,OVP,OTP,SCP|
|Long Lifespans:||50,000hrs||Voltage input:||90Vac-264Vac||Warranty:||5 years|
|Packaging Detail:||Carton ,10pcs/cnt Carton dimension:500*370*150mm 2 Layers|
|Delivery Detail:||Fast delivery time: 5-7 days|
constant current led driver
1,Direct factory price
2,Output power: 60W
3,100% full load burn-in test
4,5 years' warranty
Name: 75W 5A constant current waterproof IP67 outdoor led driver
Features and Advantages of led power supply:
Long Lifespans: 50000hrs
waterproof level: IP67
single output constant current
IC:Infineon EC:TDK EM:Rubycon
5A constant current LED drivers' speifications :
|Ripple & Noise||250mV|
|Starting time||1000mS/230Vac, 3000mS/115Vac|
|Protection||short circuit||Output Short Circuit Protection.|
|Protection mode:Hiccup ,recovery after the fault removed.|
|Protection mode:Limit highest voltage, recovery after the fault removed.|
|Over temperature||105oC±5 oC ( Internal radiator's temperature)|
|Protection mode:Closed Output voltage,recovery after temperature automatic recovery.|
75W 5A LED drivers's picture:
High quality components
Here is our production line
100% burn in test before shipment
Well package to avoid damage
why you should buy LED drivers in the company of Wintek:
1. If constant current led driver 's specification above is some different from what you require actually, kindly inform us in detail. We will be pleased to re-offer you as per your actual requirements asap.
2. We can do the OEM products as per your specification.
3. We also provide other various types of led driver and switching power supply as you need. For more information, please visit our company website.
Customized design is available.
Important when installing ANY Power Supplies (PSUs):
The Power Supply used for the LED products should be of sufficient current, the LEDs will only draw the current they require from the Power Supply which means you can power just one 12vdc LED from a high Ampere PSU. Power Supplies should not be overloaded i.e the total load of the LEDs should not exceeed the rating of the Power Supply.
Space should be left around the Power Supply to allow ventilation, this allows any heat from PSU to dissipate.
Power Supplies should not be hidden in a wall or ceiling space that will be covered with plasterboard or panelling, there should be sufficient ventilation and an access panel for replacement of the PSU.
Cable between the output of the Power Supplies and the input to the LEDs/LED Products should be sufficient to carry the total load on it. Where the Power Supply exceeds the total load a safety fuse should be used, the fuse shoud be rated slightly higher than the load, for example a load of 1.8A on a 3.5A PSU should have a fuse of 2A between the positive (+) 12v output of the PSU and the positve (+) input to the LEDs.
If you have any requirement, please don't hesitate to contact us.