US $25000 - 65000 / Set1 Set/Sets
US $650 - 720 / Unit4 Unit/Units
US $21050 - 60500 / Set1 Set/Sets
US $1200 - 1500 / Set1 Set/Sets
US $3000 - 6000 / Set1 Set/Sets
|Place of Origin:||
DCK 26 BDS
|bar bending machinery:||
rebar bending machine
|rebar bending machine:||
construction material making machinery
construction & real estate machinery
DCK 26 BDS AUTOMATIC BAR BENDING MACHINE
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE:Bending capacity is from 2mm to 26mm.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE is processed both on rihgt and left sides via switch on the control board besides has capacity of working both manual and automatic.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: Due to being only 150 kgs can be easily carried in the building zones an even in the intermediate floors.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: Despite having small measurements the working capacity is satisfactory according to users and QC feedbacks.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: Processes 40°/90°/180° bending types easily by one touch button.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: With only one button stir-up bending type (130°/ 90°/ 90°/90°/130°) is continuously processed till you deactivate the bending.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: Stir-up bending type (130°/ 90°/ 90°/90°/130°) spiral bending type and ot
Her bendnig types are continuously processed.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: The machine Works both electrical motor with 380 volt and also can be changed with 110 volt/ 220 volt / 415 volt / 440 volt according to demands. Electronically automation section processes with 24 volt and is protected against to all environmental effects. It can go on processing in all weather conditions.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: The after sales service can be maintained easily by the operator.
TECHNICAL DETAILS OF DCK-26 BDS AUTOMATIC BAR BENDING MACHINE
ELECTRICAL ENGINE POWER
1.5 KW / 3 HP
1.500 / 9 Rpm
Ø 26 mm
DCK-26 BDS SPECIAL AUTOMATIC BAR BENDING MACHINE BENDING CAPACITY
QUANTITY OF BAR
THE BAR IN mm²
Ø 26 mm
Ø 24 mm
Ø 22 mm
Ø 20 mm
Ø 18 mm
Ø 16 mm
Ø 16 mm
Ø 14 mm
Ø 10 mm
Ø 14 mm
Ø 12 mm
Ø 8 mm
WARRANTY : Warranty duration is 2 years against to manufacturing defects.
All of the products are certificated according to international TS EN ISO 9001: 2000, OHSAS 18001: 1999 and CE standards.
DCK-26 BDS AUTOMATIC BAR BENDING MACHINE: As in our all machines working sides of all the replacement parts are heat-treated and the surface defection is decreased to 0%.