Acid activated bleaching earth for gasoline oil purification
Item Index Decolorizing rate(via burning oil & asphalt approach),% ≥95 Activity(NaAc approach) ≥180 Free acid (H2SO4),% ≤0.15 Water content before leaving factory,% ≤10.0 Granularity(over 200 mesh),% ≥90 Filtration rate, ml/min ≥10.0 Bulk density(g/ml) 0.7~1.1 Heavy metal(measured in Pb), % <0.005,arsenic(As),%:<0.0005
Composition SiO2 Al2O3 Fe2O3 FeO TiO CaO MgO MnO K2O Na2O P2O5 Content (%) 62.34 17.24 2.73 0.12 0.15 2.09 5.44 0.72 0.12 0.03 62.34
3.Advantage: 1)with activated carbon high decoloration rate 2)strong adsorbability 3)low residue oil rate with high filtration speed 4)stable chemical properties,,no reaction to oil ,low additive quantities 5)non-toxic, odor-free 6)without color and acid reversion 7)low free acid 8)can be reutilization after treatment and no pollution to enviroment
4.Usages: 1) mainly for waste oil recycling,especially in waste diesle oil ,gasoline oil,engine oil,and other lubricant oil. 2)used for many kinds of vegetable oils, animal fats, such as soybean oil,sunflower seeds oil,rapeseeds oil, etc. 3) industrial oils and fats, mineral oil 4) for oil re-refining and regeneration of waste oil. 5) water purification and treatment and sewage treatment 6) chemical catalysts, separating agents, desiccant, carrier and other products. 5.Our details
SAMPLE PRODUCT DETAIL
PACKING EFFECT WORKSHOP
We can provide you free samples if you want to have a test.
The test process is as following,
Use requirement : 1, according to the content of impurities and thickness, add proper activated clay, general
usage 5% -10% for oil heavy. 2, gasoline and diesel generally don’t need to heat, but sticky oil need to be heated, such
as Vaseline, engine oil. open fire and steam is available, Generally heating to 105 °C --110
°C , reaction kettle in iron in add white earth in advance, can prevent oxidation of oil or
Method of use: Firstly, take 100 ML oil, weighing about 15g activated clay, adding slowly by spoon and stiring, fully precipitation, until reaching for treatment of oil requirements, finally draw activated clay dosage. And then put into production, right amount of white earth into large container, and then press the front of the proportion of the oil that include uniform mixing (when necessary add heating kettle, heat diluted in about 30 minutes or so), wait for after cooling precipitation, with pressure filter pressure filtration
Note: The activated clay began to lose gesso when temperature above 300 °C , make the structure change of decolorization have influence. The surface is very easy absorption of moisture, the water is high also influence decoloring effect, and the catalytic performance. Pay attention to prevent rain, moist, should be stored in ventilated dry place.
Welcome to contact us! Skype: xiaojiuwo1005