Withstanding the Test of Time
Think Alpine, and your mind is filled with images of rugged and massive Swiss mountains. Think Alpine Chronograph watch, and the image of a rugged and magnificent Swiss watch appears as well.
Befitting of a man with an active and busy lifestyle, the Alpine Chronograph is both sturdy and reliable with scratchproof sapphire crystal, a water resistance of up to 50 metres, as well as alarm and chronograph functions. Whether you wear it for casual or dressed-up occasions with genuine leather strap, or go for the sportier look with its stainless steel bracelet design, this high-quality timepiece from CHAIROS® is set to help you scale the heights of success.
Case &Crown Two-tone stainless steel with IPG gold plating
Caseback Press-ft stainless steel with engraved serial number
Glass Scratchproof sapphire crystal
Strap High quality genuine leather
Functions Hour, Minute, Second, Date, Alarm and Chronograph
Diameter 44 mm
Water Resistance 5 ATM (50 metres/165 feet)
Movement Swiss Quartz - Ronda 5130D
If you have a hand-wound watch, it is advisable to wind it every morning. Mechanical watches must be serviced at least every three to five years to have the mechanics checked and relubricated. The tiny parts inside the watch are under tremendous strain, so friction is their greatest enemy. Lubrication prevents the bearings from drying out and grinding away the steel parts.
Exposing your watch to high temperatures, such as placing it on the dashboard of your vehicle or submerging it in a hot tub, may cause the watch to malfunction, may shorten battery life, or may damage its internal components. Leaving the watch in extreme cold temperatures may cause irregular timekeeping.
Do not expose an analogue quartz watch to magnetism. If you do, it may temporarily stop operating or may show gain or loss in time.
To ensure that it maintains its water resistance, make sure the crown of the watch is always pushed against the case. You should have your watch checked once a year for water resistance. Condensation inside your watch is an indication that its water resistance has been affected.
For maximum performance, regularly wipe your watch with a clean, soft cloth. Stains, water spots and dirt that have accumulated on the case, crystal or bank may cause premature wear. If you use your water-resistant watch in the shower, chlorinated water or saltwater, rinse it with fresh water and dry it thoroughly afterwards.
Care for the Crystal Surface
- A watch may have a scratch-resistant sapphire crystal face, but that doesn't mean you should toss your watch on top of the dresser or into a drawer at the end of the day. It is better to store or wrap it in a soft cloth before placing it down.
- Replace broken or scratched crystals immediately. Even a hairline crack can bring dust or moisture into the mechanism, affecting the accuracy.
Care for Metal Bracelets
- If you participate in activities that cause you to sweat excessively, you may want to consider getting a watch with a metal bracelet or rubber strap, rather than a leather strap.
- Since the metal bracelet is worn next to the skin, it collects dust and perspiration, which becomes soiled if not cleaned regularly. This is particularly true of the inner mesh of the bracelet.
- When soil and rust are present in a bracelet, they are dissolved by perspiration and can cause staining of the cuffs and, in some instances, irritation of the skin.
- Wipe dirt and perspiration off with a soft, dry, lint-free cloth. If the watch is water resistant, you can occasionally clean the bracelet with a soft brush and warm soapy water. Dry the bracelet completely.
- A toothpick can also be used to clean any dirt that has built up in the bracelet or casing of the watch.
Care for Leather Straps
- Straps that are made of natural and genuine leather will gradually deteriorate with constant exposure to perspiration. If not cleaned, perspiration can wash out the natural oils and cause the leather to become dry. Any moisture should be blotted with a soft cloth or paper towel and the strap should be allowed to dry naturally.
- Salt residue and soil can be removed from leather straps by cleaning it with a dampened soft cloth and mild soap (or saddle soap, which is special leather soap).
- Wear the strap slightly loose, with an allowance of one finger space between the wrist and strap. This invites air circulation and allows any moisture to evaporate.
Care for Rubber Straps
- Rubber straps should be washed frequently with mild soap and warm water using a soft brush.
- Solvents, oils, perspiration, tanning lotions and salt can cause rubber to deteriorate if not removed.
Contact Number: +91 9581093997