We Manufacture High Quality Auotmatic Power Factor Correction Panels assembled from West European Components.
We are ISO 9001:2000 Certified in L.V & M.V & SCADA Systems
A.C.B 3 or 4 Pole Type Ratings (1600A, 2000A, 2500A, 3200A, 4000A, 5000A, 6400A).
Contractor 3 or 4 Pole Type Rating (10A up to 1250A).
Change Over 3 or 4 Pole Type (800A, 1000A, 1250A, 1600A, 2000A, 2500A).
Up to 690 VAC, 50 Hz.
IP 55 indoor (outdoor ratings alsoavailable).
According IEC 439-1.
Power Busbar and Control wiring are color coded.
Auxiliary Free Contact interface (Generator Running 1 NO, Load on Generator 1 NO, Load on Main 1 NO)
Main Source sensing (Undervoltage and Overvoltage)
3-phase rotation protection.
3-phase voltage unbalance/loss.
Emergency Stop Terminal (Shorted at Factory when delivered).
Engine Cool-down Timer adjustable timer allows the engine to run at no load after the transfer.
Engine Warm-up Timer adjustable timer allows engine to operate at no load before transfer.
Utility interrupt delay adjustable timer.
Mimic diagram with (Generator Running, Load on
Generator, Load on Mains).
Programmable plant exerciser 7 day weekly timer.
Generator Start retry logic and Generator fail to
Start (Generator over-cranking protection).
MODBUS/RTU Slave communication interface.
Integration of Battery charger.
Integration of Yellow Horn 24VDC or 230VAC works when generator is
running (useful when generator is Located far from the panel).
Space heater with thermostat.
Analog Conventional Measuring Set ((1)Voltmeter,(1) 7 position voltage selector switch, (3) ammeters, (3) current transformers) on Load side Digital Microprocessor measuring relay over 20 different electrical measurments can be measured featuring bi-metallic features for the measured quantities.
Other protection features could be added (Temperature, Low Fuel, etc).
Other protections or control features can added.(Customer Specified).