BSD G2300 Multi-purpose Neutral Silicone Sealant
1.be easily used and extruded
BSD G2300 MULTI-PURPOSE SILICONE SEALANT is a one part, read-to-use, high performance, neutral cure silicone sealant. It has an excellent sealing ability to most construction materials without a primer.
Result Translucent Pigmented
As Supplied Tested at 23°C and 50% RH
Flow (sag or slump)
Tack free Time
Curing time (5mm)
As Cured-after 21 days at 23°C and 50% RH
Durometer Hardness, Shore A
BSD G2300 MULTI-PURPOSE SILICONE SEALANT
Cut seal on top of cartridge. Screw on nozzle and cut the nozzle at 45°angle to the desired shape and size. For better appearance cover outside of joint areas with masking taps before application. Tool immediately after sealant application and remove masking tape before sealant skins.
STORAGE AND USABLE LIFE
12 months from manufacture date when store in cool dry locations below 25°C, keep away from heat source and direct sunlight during storage.
Clean all grease, dirty, water, klunky sealant from surface, accessories and protective coatings and any pollutant left inside joints and sunken parts. For best results wipe all surfaces with GNS cleaner, methylated spirits or acetone, use a lint free cloth, then wipe again with a dry lint free cloth.
Detergent or soap water treatments are not recommended.