Other Waterproofing Materials
|Place of Origin:||
BAUMERK B PR 100
B PR 100
|Packaging Detail:||17 kg metal can|
|Delivery Detail:||3 DAYS|
It is a ready to use primer for bituminous membranes obtained by mixing water and bitumen by using special methods.
It is only used as a priming coat before the application of all brands of bitumen membranes. Thanks to the superior
sticking property, it provides a stronger and spaceless surface sticking for the bitumen membranes applied on it.
It can be used on all horizontal and vertical surfaces and in closed areas like basement, cellar, etc.
Base : Bitumen
Thinner : Water
Thickness : Concentrated Syrup
Density : 0.98 g/cm 3
Softening Temperature : + 70 C
Suitable Application Temperature : Between (+5°C) - (+35°C)
Solid content : 28 %
Drying Duration : Touching : 1 Hour
: Full Drying : 5-6 Hours
: Test : 8 Days
It is very economical. It is easily applicable.
It can be used in closed areas for not containing toxic and flammable substances
After the evaporation of the structural water, establishes a waterproof layer not redissolving with water.
The application surface should be without dust, rust, dirt, grease and oil and the loose parts should be scrapped out.
The sharp points or horizontal-vertical joint places subject to cracking should be rounded.
The large pores and the cracks should be filled with REPAMERK 1 repair mortar or PH 55 for corners.
It is ready to use. It is applied by bitumen brush, roller or gun. It dries within about 4-5 hours depending on the weather
conditions. It should not be applied in rainy days or within the temperatures lower than +5 °C.
Cleaning Of The Tools
The cleaning of the tools is accomplished with soapy water just after the usage but with industrial type of solvents after
0,30 - 0,40 kg/m
17 kg metal can
Storage and Shelf Life
2 year in original packaging. Storage below 35°C.