US $100000 - 10000000 / Unit1 Unit/Units
EUR 600000 - 1500000 / Plant1 Plant/Plants
US $10000 - 200000 / Set1 Piece/Pieces
|Place of Origin:||
Brass,Bronze, Al Bronze,CuNi,Cu
|Packaging Detail:||Standard Seaworthy Packing|
TECHNICAL SPECIFICATIONS SCC – 100 MODEL CONTINUOUS CASTING MACHINE
Stoker SCC - 100 model continuous casting machine comprising resistance heated melting and casting furnace, mains transformer, withdrawal mechanism and all necessary controls & instrumentation.
Robust fabricated steel furnace body with removable side panels to facilitate maintenance & inspection of furnace interior and critical high temperature components. Furnace body is water traced to ensure stability & long life
The furnace body is fully insulated with high grade refractory material capable of withstanding 1450 degree centigrade. The insulation is done ceramic blankets & low mass insulation bricks to ensure minimum heat loss & the furnace body temperature is kept minimum.
125 KVA , 3 phase,oil cooled very low voltage 16 to 24 volts. With tap changer on each phase
With 3 pahse THYRISTER DRIVE (Italian Make)
Self centering withdrawal mechanism with positive drive to each withdrawal shaft driven by AC servo Motor Japanease makefor Multiple rod withdrawal system for withdrawal of 4 Nos rods simultaneously. Through 2 No. dies.
To minimize oxidation of critical interior high temperature graphite components, as well as molten metal nitrogen gas is passed.
Failure of nitrogen gas triggers an audible alarm.
CONTROLS AND INSTRUMENTATION
- 3 no primary warning lights
- 3 no secondary ammeter
-1 no Primary voltage indicator
- 1 no Secondary voltage indicator
- 1 no digital Eurotherm temperature controller
- 2 no digital temperature indicator
- 1 No PLC
- 2 no 220volts digital AC servo drive Panasonic/Omron make.
- 7” tft coloured touch screen
- 2 no motor self illuminated off/on switch
- 3 no nitrogen gas rotometer
- 1 no 200 AMP Eurotherm make digital thyristor stack for soft start
- 1 no 440Volts to 200 volts 5 KVA transformer.
- 1 no no nitrogen alarm.
- 2 no voltage selector switches
- 1 no 24 Volts DC SMPS
RUN OUT ROLLER TRACK
To support cast material a steel run out roller track is provided in front of withdrawal mechanism
CASTING DIE COOLERS
Water jacket & plate cooled coolers are supplied as standard kits. Probe cooling is also supplied.
Facility to adopt casting dies round & rectangular shape are manufactured from high density graphite. Casting dies must be ordered separately from the continuous casting machine according to customer's specific requirements. 3 dies are free along with the machine
Integrated melting : 100 Kg/Hr*
Separate melting : 150 Kg/Hr*
* figures listed are maximum output rates. Actual output achieved will be subject to section size & alloy being cast.
Capacity : 200 Kg
Crucibles are manufactured from solid graphite blocks. Crucibles may be manufactured to accept round as well as rectangular dies. Two crucibles are supplied with the machine. The crucibles are ANTI OXIDATION TREATED.
Rod Dia: 12 mm to 150 mm*
Flat : max width 200 mm
Billet & Hollow ; 150 mm
* with separate melting
Electricity : 125 KVA, three phase 50 Cycles
Cooling Water : 180 liters per minute 3 to 4 Kg per sq. cm, water treatment may be required depending upon confirmation by analysis
Nitrogen Gas : Oxygen content less than 5 PPM, dew point better than -70
5m x 10m
SHIPPING DETAILS : Standard 20' container
Stoker Concast (P) Ltdreserves the right to alter specifications at any time without notice. This is in line with our policy of constant product improvement.