|CAS No.:||26760-85-0||Other Names:||acrylic copolymer||MF:||(C11H20O2C7H12O2)x|
|Place of Origin:||Guangdong China (Mainland)||Main Raw Material:||acrylic copolymer||Usage:||
Appliance Paint,Building Coating,Electrical Insulating Varnish,Furniture Paint,Paper Coating,Plastic Coating,Road Marking Paint,Rubber Coating,Decoration
|Application Method:||Brush Roller Airless Spray||State:||Liquid Coating||Brand Name:||Carpoly|
|microbia resistance:||Good||Mildew resistance:||Good||Water Resistance:||Good|
|Scrubbing Resistance:||more than 30000 times||Solid Content:||>50%||Adhesion:||good|
By Brush:10-12m2/kg By spray:8-9 m2/kg/coat
|DryTime:||Touch Dry≤1h Recoat Time≥2-3hrs||Shelf Life:||
24 Months Use up in 4hrs after mixing
|Color:||Depand on your need|
|Delivery Detail:||7 Days After comfirm the order|
1.odorless 2.low VOC 3.antimicrobial 4. mildew resistant 5.environmentally friendly 6.waterproof 7.Scrub resistant
It is an enhanced mildew proof product adopting nanoscale Ag+ antimicrobial and mildew proof technology, integrating
odorless formula, with fresh product smell, smooth paint film, durable and beautiful paint.As an affordable and environmentally
friendly product with excellent decorative performance, it is characterized by fresh smell, environmental health, strong
covering power, large painting area, convenient constructionapplication, short constructionapplication period, etc.
1.The odorless technology largely reduces the VOC in emulsion. This environmental-friendly paint is so fresh that there is no more unpleasant odor.
2.Excellent fungus resistances. It is protected from mould growing.
3.Waterproof. The density of the paint film is so high that the paint film effectively prevents from water penetration.
4.Covers hairline cracks . The elasticity of paint film enables it stretching and covering hairline cracks and no splitting is incurred.
5. Superior coverage
7. Computerized color matching for more choices
Theoretical Solids By Volume:
more than 50%
Theoretically 1 litre of this product covers 12 sqm in 1 coat. Coverage varies considerably depending on application methods and surface roughness and porosity.
Minimum 12 months at 77F(25C) – unopened and store in cool and dry places.
Recommended Film Thickness:
Wet: 80 micron
Dry: 30 micron
Dry Time: At 77F (25C) and 50% R.H. to recoat
Touch Dry: 1 hours
Recoat : 2-3 hours
Brush, Roll, conventional spray or Airless Spray.
Thinner: Thin up 15% depend on different application methods & temperature. Do not over thin by adding more than 30% water.
Brush or Roller: For sealing new or bare surfaces thin with up to 1 part of clean water to 5-10 parts of paint(10%-20%)
Conventional Spray: Add up to 1 part clean water to 5 parts paint(20%)
Airless spray: do not thin
Clean up equipment with water
GENERAL SURFACE PREPARATION
All surfaces must be clean, dry, free of oil, dirt, chemicals, mildew, moisture content less than 14% and pH value below10.
Fresh concrete must cure at least 28 days and meet the surface preparation requirement. To resist alkalis and to obtain best results first apply Carpoly Alkali Resistance Primer.
Previously Painted Surface:
Remove flaking paint or powdery, fill the defects and dusting ofo seal powdery surface and to obtain best results first apply Carpoly Alkali Resistance Primer
Fungus Growth Wall:
Remove all fungus by scraping following by using a suitable abrasive paper.Wash the surface with appropriate fungus watching, clean and wait till dry To seal powdery surface and to obtain best results first apply Carpoly Alkali Resistance Primer
TYPICAL PAINTING SYSTEM
All kinds of interior Wall surfaces
1.Carpoly Alkali Resistance Primer (1 coat)
2.Carpoly Interior Emulsion Wall Paint (2 coats)
DIRECTIONS FOR USED
Read the instruction thorough before useThin with water if necessary. Do not mix it too much. Do not hold too much paint on paint brush or roller. Use up opened paint as soon as possible. Do not pour the diluted paint back to original pack.
For industrial use only. Keep put of reach of children.
Freight Classification: Paint