|Place of Origin:||Guangdong China (Mainland)||Brand Name:||WINTEK||Model Number:||WSD-151-12A50W|
|Output Power:||151W||Output Type:||
Single,Single output constant current
|Output Voltage:||8V-12VDC||Output Frequency:||47Hz-63Hz||Output Current:||12.5A|
built in active PFC function,PF>0.95
|Efficiency:||92%||Components:||Infineon, tdk, rubycon|
|Housing material:||Aluminum||Protection:||SCP/OTP/OVP||Waterprrof level:||IP67|
|Working temperature:||-40°C -- +70°C||Dimensions:||207mm*80mm*40mm||Warranty:||5 years|
|Packaging Detail:||Carton,10pcs/cnt Hard carton Carton dimensions:290mm*270mm*220mm|
|Delivery Detail:||3-7 working days; (As your requirement)|
led driver 150w
1.100% full load burn-in test
2.waterproof level: IP67
Name: CE UL TUV CB approved 150W 12.5A constant current waterproof IP67 high efficiency 150W outdoor led driver
Features and advantages:
1.Components: Infineon, TDK, Rubycon.
2.PF>0.95, built in active PFC function
3. Meet withCE, UL, CQC, ETL, FCC standard.
4. Warranty: Long warranty.(5 years)
5.Application: suitable outdoor work environment, such as, for led street light, led highbay light.
Description of LED driver 150w:
|Ripple & Noise||250mV|
|Starting time||1000mS/230Vac, 3000mS/115Vac|
|Protection||short circuit||Output Short Circuit Protection.|
|Protection mode:Hiccup ,recovery after the fault removed.|
|Protection mode:Limit highest voltage, recovery after the fault removed.|
|Over temperature||105oC±5 oC ( Internal radiator's temperature)|
|Protection mode:Closed Output voltage,recovery after temperature automatic recovery.|
|Environment||Working temperature&humidity||-40oC-50 oC;20%-90%RH,Without condensation .|
|Storage temperature&humidity||-40 oC-85 oC;10%-95%RH|
|Vibration Resist||10-500Hz,2G ,X,Y,Z axis 60 mintues.|
|Insulation resistance||I/P-O/P: 100M Ohms/500Vdc|
|EMI||EN55015, GB9254 CLASSB|
High quality components of led driver 150w
Here is our production line
100% burn in test before shipment
Well package to avoid damage
why you should buy LED drivers in the company of Wintek:
1. If constant current led driver 's specification above is some different from what you require actually, kindly inform us in detail. We will be pleased to re-offer you as per your actual requirements asap.
2. We can do the OEM products as per your specification.
3. We also provide other various types of led driver and switching power supply as you need. For more information, please visit our company website.
Customized design is available.
Important when installing ANY Power Supplies (PSUs):
The Power Supply used for the LED products should be of sufficient current, the LEDs will only draw the current they require from the Power Supply which means you can power just one 12vdc LED from a high Ampere PSU. Power Supplies should not be overloaded i.e the total load of the LEDs should not exceeed the rating of the Power Supply.
Space should be left around the Power Supply to allow ventilation, this allows any heat from PSU to dissipate.
Power Supplies should not be hidden in a wall or ceiling space that will be covered with plasterboard or panelling, there should be sufficient ventilation and an access panel for replacement of the PSU.
Cable between the output of the Power Supplies and the input to the LEDs/LED Products should be sufficient to carry the total load on it. Where the Power Supply exceeds the total load a safety fuse should be used, the fuse shoud be rated slightly higher than the load, for example a load of 1.8A on a 3.5A PSU should have a fuse of 2A between the positive (+) 12v output of the PSU and the positve (+) input to the LEDs.
If you have any requirement, please don't hesitate to contact us.