1. Nice structure
2. Reliable anti-corrosion
3. Well seal performance
4. Easy repair
5. IP54 / IP55
CMS-809 Centrifugal pump
CMS-809 Centrifugal pump : plastics - lined pump is single - stage single - priming chemical centrifugal pump which is combined with international standard and working process of nonmetallic pump. The material of pump body, pump cover, impeller and flow parts is lined A3 steel, for axle seal, it adopts advanced bellows mechanical seal, featuring corrosion resistance, non aging, high mechanical strength, stable operation, rational structure, reliable seal, convenient maintenance and long service life, widely applied in the fields of chemical, pharmacy, petroleum, metallurgical, pickling, electroplating, dyeing and pesticide to convey sulfur acid, hydrochloric acid, acetic acid, hydrofluoric acid, nitric acid, alkali, oxidant, organic solvent under - 20 °C~+ 100 °C , it is a energy - saving novel substitute for FSB type fluorine pump and IH type chemical centrifugal pump, enjoying good interchangeability with IH type chemical centrifugal pump.
In accordance with different media conveyed, the material of flow parts can be perfluorinated ethylene propylene copolymer ( F46 ) and polyvinylidene fluoride ( PVDF )
CMS-809 Centrifugal pumpalso can be adjusted into different performance levels through impeller trimming as. They are also used for pumping clean water or liquids similar to water, finding great application in industry, city water supply, construction, long-distance transportation, air-conditioning, firefighting and irrigation.
1. Flow rate up to 550 m3/h 2. Delivery head up to 50.0m 3. Power up to 55.0 kw 2900/1450 r/min Volt=380V/50HZ Three-phase power supply if request.
Single-phase power supply if request. 4. Suitable Medium:Concentrated Sulfuric acid
CMS-809 Centrifugal pumpare single stage centrifugal pumps, suitable for both domestic and industrial applications to convey clean liquids and non-aggressive chemical fluids. The hydraulic characteristic is with higher head and smaller capacity.
a) Compact structure b) Attractive design c) Low noise, steady performance d) No leakage e) High concentricity of components f) Easy installation, easy maintenance
Max Temperature of Fluid up to +80°C Max Pressure:10bar Max Ambient Temperature up to 40 °C
Standard date and equipment:
Brass imppler, carbon steel mtor shaft,
with thermal protector inside.
Flow-Through:Cast Iron/Carbon Steel
Body: Cast Iron/Carbon Steel
Cast iron standard, Ductile Iron, Stainless Steel optional
a) Petroleum Industry b) Chemical Industry c) Pharmacy and Health d) Environmental and Water treatment e)electroplating industry f)Environmental protection g)food service industry h)Printing and dyeing area i)textile industry, etc
Translate medium which is under 90 degree or under 105degree and small soft particals or fiber, corrosive or sanitation liquid .
Its widely used for industries in medicine, daily chemical industry, light industry, food, beverage,environment protection, blanch, galvanization and water treatment.
-20 - 100°C
Closed, externally ventilated
IP54 / IP55
Flow Rate (Q)
1450 or 2900 rpm (50Hz),1750 or 3500 rpm (60Hz)
10 Bar standard, 16Bar on request
Performance referring to BS EN733/ DIN24255 Standard
It may be necessary to account for pressure loss in connection with long pipes, bends or valves, etc.
Best efficiency at the estimated duty point.
If the pump is expected always to operate at the same duty point, select a pump which is operating at a duty point corresponding with the best efficiency of the pump. In case of varying consumption, select a pump which best efficiency falls within the duty range representing the highest power consumption, i.e. typically the duty range covering the greater part of the duty time.
As standard, the SLCL(F) high pressure range is fitted with a high pressure cartridge shaft seal suitable for the most common high pressure applications. The following three key parameters must be taken into account, when selecting the shaft seal:
Type of pumped liquid and
Shenlong offers a wide range of shaft seal variants to meet specific demands.
Inlet pressure and operating pressure
The limit values below must not be exceeded as regards:
Our company is a high-tech and motivated enterprise. Our company was founded in the 21st century and is located in Zhaoyuan, Shandong Province.
Our company mainly focuses on the development of industrial automation instruments and sensors. Our products have the following six categories:
* Analytical instruments
* Level instruments
* Pressure instruments
* Flow instruments
* Temperature instruments
* Testing equipment
Our company supplies complete sets of level gauges, including ... View detail