US $0 - 1414 / Set1 Set/Sets
US $1 - 400 / Piece1 Piece/Pieces
US $7000 - 10000 / Set1 Set/Sets
US $300 - 1000 / Set1 Unit/Units
US $18000 - 19800 / Set1 Set/Sets
Lathe and Turning Center
|Place of Origin:||
Seoul South Korea
|Delivery Detail:||15~25 days|
CNC controller system includes CNC controllers, AC servo motor & drivers, Spindle motor & drivers, tool posts, MPG pendants, etc
GSK980TDb CNC Controls for Lathe
1.Five Axis Control;
2.2ms Interpolation Cycle;
4.Rigid Screw Processing.
GSK 980TDb CNC Control for Lathe
Number of control axes
Number of control axes: five axes (X, Z, Y, 4th and 5th )
Number of linkage axes: three axes
Number of PLC control axes: four axes
Feeding axes function
Minimum command unit: 0.001mm or 0.0001mm is selectable
Position command range: ±99999999 × minimum command unit
24m/min Rapid traverse speed: When the command unit is 0.001mm, the maximum
speed is 60m/min; 0.0001mm, the maximum speed is 24m/min.
Rapid override: Total four levels: F0, 25%, 50% and 100%, real-time adjusting
Feeding override: Total 16 levels: 0~150%, real-time adjusting
Interpolation mode: Interpolation of linear, arc (support arc interpolation of
three points), thread, ellipse and parabola and rigid tapping.
Common thread (follow the spindle)/rigid thread
Single-headed/multiple thread of straight, taper and terminal surface in
metric system/inch system, equal and variable pitch thread
Thread retraction length, angle and speed characteristics can be set
Thread pitch: 0.01mm~500mm or 0.06 tooth/inch~25,400 tooth/inch
Acceleration and deceleration function
Cutting feeding: Linear type or index type is selectable.
Rapid traverse: Linear type or S type
Thread cutting: Linear type or index type is selectable.
The starting speed, finishing speed and time of acceleration and deceleration
are set by the parameter.
Analog voltage 0V~10V output in two channels, support two-spindle control.
Spindle encoder feedback in one channel, the resolution of spindle encoder can
The transmission ratio between encoder and spindle is: (1~255):(1~255)
Spindle speed: It is set by S code or PLC signal, the speed range is
Spindle override: Total 8 levels: 50%~120%, real-time adjusting
Spindle constant surface speed control
Tool length compensation
Tool nose radius compensation (C type)
Tool wearing compensation
Tool life management
Method of setting tools: Tool-setting in fixed position, trial cutting
tool-setting, return to reference point, auto tool-setting
Tool offset executing mode: Rewriting coordinate mode, tool traverse mode
Pitch error compensation in memory type
PLC program in two levels, maximum 5,000 steps, the refresh cycle of the 1st
level program: 8ms
PLC program communication download
Support PLC warning and PLC alarm
Support many PLC programs (maximum 16), the current running PLC program can be
Basic I/O: input in 40 points/output in 32 points
7.4″large screen LCD, the resolution is 234×480
Display in Chinese, English, Spanish or Russian, etc
Display in two-dimensional tool path
Operation mode: Edit, auto, MDI, mechanical zero return, MPG/single step,
manual, program zero-return
Operation authority of multiple-level management
Program capacity: 25M, 10,000 programs (including subprograms, macro programs)
Editing function: program/block/characters research, rewriting and deleting
Program format: ISO code, support macro command programming in sentence type,
programming of relative coordinate, absolute coordinate and hybrid coordinate.
Calling program: Support macro program with parameter, subprogram nesting of 4
RS232: Files of part program and parameter, etc can be transmitted in two-way,
support PLC program, serial ports of software upgrade.
USB: File operation and file directly processing in flash disk, support PLC
programs, flash disk of software upgrade.
Hardware travel limit
Software travel limit
Data restoring and recovering