CRMX Nano Concrete Hydrophobic Densifier and Chemical Hardener

FOB Price: US $0.01 - 100,000 / Gallon Get Latest Price
Min.Order Quantity: 5 Gallon/Gallons
Supply Ability: 10000 Gallon/Gallons per Month
Port: Ohio, USA
Payment Terms: T/T,Western Union
Add to My Favorites

Quick Details

CAS No.:
concrete densifier
Other Names:
concrete hardener
Place of Origin:
Ohio United States
Classification:
Double Components Adhesives
Main Raw Material:
Silicone
Usage:
Construction,Concrete Polishing
Brand Name:
CRMX
Model Number:
concrete densifier

Packaging & Delivery

Packaging Detail: 5 Gallon (18.93 Liter) Pails 55 Gallon (208.20 Liter) Drums
Delivery Detail: 7-30 days

Specifications

SPECIFICATIONS
Complies with all State and Federal allowable VOC Requirement.
Treated surface passes the minimal (OSHA) Static

DESCRIPTION

CRMX Hydro is a hydrophobic concrete densifier and chemical hardener in a ready to use formula, colorless liquid, which hardens and dustproofs concrete with nano sized particles. The reacted surface creates an environment that does not welcome moisture or topical water spills. Treated surfaces will keep common spills and other moisture suspended on the surface of the concrete substantially longer than untreated surfaces. Once properly applied, the finished surface provides substantial improvement in abrasion resistance and will significantly improve the durability of the surface when compared to untreated concrete. Once CorMAXX Hydro is applied the chemical reaction takes place, producing a byproduct that fills in the pores of the concrete one molecule at a time. CorMAXX Hydro solidifies the concrete, eliminating dusting, pitting and excessive wear.
CorMAXX Hydro is chemically engineered to provide simple, quick, sustainable performance. CorMAXX Hydro is simply sprayed on, and then left moist on the surface for 20 minutes. In this short period of time, the colorless liquid quickly penetrates into the surface. Unlike traditional densifiers, CorMAXX Hydro does not require brushing into the surface, rinsing, or removal of excessively applied material. After application, the resulting surface features enhanced protection and sheen, coupled with superior abrasion resistance. This environmentally safe, water-based
product features a zero VOC content and provides an attractive option in green building applications.

 

 

USES

CorMAXX Hydro is recommended for use wherever chemically treated, densified, hardened, dustproofed, and improved abrasion resistant surfaces are required in wet environments. Ideal applications include floors in industrial plants and warehouses, agricultural facilities, water treatment plants, chemical processing facilities, oil refineries, sports stadiums, hospitals, airports, and museums. CorMAXX Hydro is also successfully used in conjunction with CorMAXX Cure as a major component in the process of curing of newly placed concrete.

 

 

SPECIFICATIONS
• Complies with all State and Federal allowable VOC Requirement.
• Treated surface passes the minimal (OSHA) Static Coefficient of Friction (SCOF) standards.

 

 

FEATURES/BENEFITS

• Nano sized molecular reaction penetrates deeply into concrete to densify and harden surfaces to help prevent entry of moisture and other foreign matter.
• Quick and easy, hassle-free application procedure (no flushing or rinsing required).
• Does not require brushing into the surface or rinsing.
• Dustproofs and improves abrasion resistance of treated surfaces.
• Provides a permanent, attractive sheen with the ability to quickly polish.
• Protects against scratching or peeling.
• Provides a hardened, protected surface that will not yellow or discolor.
• Drastically Improves light reflectivity with single application.
• Compatible with solvent based topical sealers.
• Ready to use formulation and easy to apply.
• Indoor and Exterior use.
• Environmentally safe, non-hazardous.
• No VOC’s

 

 

COVERAGE/APPLICATION RATE

Type of Surface                     ft.2/gal.                   m2/gal.
Fresh (Newly Placed)           600-800               55.74-74.32
Existing (Steel)                     500-600               46.45-55.74
Existing (Broomed)               300-400               27.87-37.16
Note: Coverage rates may vary, depending on the finish and porosity of the concrete.

 

 

PACKAGING
5 Gallon (18.93 Liter) Pails
55 Gallon (208.20 Liter) Drums

 

 

 SHELF LIFE (TYPICAL)

One year in original, unopened container.

 

 

LEED INFORMATION
May help contribute to LEED credits:
• EQ Credit 4.2: Low-Emitting Materials: Paints & Coatings
• MR Credit 5.1: Regional Materials: 10% Extracted, Processed & Manufactured Regionally
• MR Credit 5.2: Regional Materials: 20% Extracted, Processed & Manufactured Regionally

 

 

APPLICATION
Surface Preparation ... Fresh Concrete: On newly placed concrete, CorMAXX Hydro is applied after CorMAXX Cure, after final troweling and when concrete surface is dry enough to not leave imprints from foot traffic with a HVLP pump sprayer.


For a curing and hardening system, use CorMAXX Cure™ curing agent from GMI Engineered Products during concrete finishing operations. Apply CorMAXX Hydro according to below existing concrete directions a minimum of 5 days after new placement of concrete.


Existing (Old) Concrete: Surface should be clean and structurally sound. Remove all residues, curing compounds, oils, sealers, contaminants, and laitance before applying. D-Limonene Orange Cleaners may be used for cleaning heavy contaminated areas if necessary. Fill and repair all holes, cracks, and any other areas of concern.


Mixing ... No Mixing is Required


Application Method … Fresh Concrete: Apply undiluted

CorMAXX Hydro per proper application rates using HVLP sprayer or by spreading evenly with a soft-bristled broom. No further application steps are required for fresh concrete.

 

Existing (Old) Concrete: Saturate the surface with undiluted CorMAXX Hydro with HVLP sprayer, squeegee, or broom. Keep surface moist with CorMAXX Hydro for 20.

 

NOTE: Pay particular attention to porous and/or dry
areas. These areas must be re wet at all times with CorMAXX Hydro and remain wet for a continuous 20 minutes. After the final 20 minute dwell time, let the entire surface dry.

 

 

Burnishing … CorMAXX Hydro can be burnished to a high sheen on steel trowel concrete floors. A high- speed burnisher (2000-2200 rpm) with medium to coarse maintenance pad is needed. Diamond impregnated pads are acceptable as well.

 

 

WARNING… Immediately wash off over-spray from glass, aluminum, or highly polished surfaces with water to avoid etching of surfaces.

 

 

Drying Time ... 45minutes - 2 hours. CorMAXX Hydro dries very quickly on newly placed concrete. Drying times may be extended on existing (old) concrete due to surface conditions. Restrict foot traffic until surface is dry.

 

 

Cleanup ... While still wet, equipment may be cleaned quickly and easily with soap and water.

 

 

PRECAUTIONS
DO NOT DILUTE. Do not apply if the temperature of the
concrete is less than 38oF (3o C) or above 165oF (74oC).

 

 

KEEP FROM FREEZING. If frozen, product should be thawed and agitated slightly prior to use.

 

HEALTH HAZARDS

CorMAXX Hydro is non-combustible. (Flash point is>210oF.) Direct contact will result in irritation of the skin and eyes. Inhalation of product mist may result in respiratory irritation. Refer to Material Safety Data Sheet
for complete health and safety information.

 

For most current data sheets and MSDS please contact with us feel freely.

 

 

LIMITED WARRANTY

“GMI Engineered Products, LLC. warrants at the time and place we make shipment, our material will be of good quality and will conform with our published specifications in force on the date of acceptance of the order.” Read complete warranty. Copy furnished upon request.

 

 

Disclaimer

The information contained herein is included for illustrative purposes only, and to the best of our knowledge, is accurate and reliable. GMI Engineered Products, LLC. cannot however under any circumstances make any guarantee of results or assume any obligation or liability in connection with the use of this information. As GMI Engineered Products, LLC. has no control over the use to which others may put its product, it is recommended that the products be tested to determine if suitable for specific application and/or our information is valid in a particular circumstance. Responsibility remains with the architect or engineer, contractor and owner for the design, application and proper installation of each product. Specifier and end user shall determine the suitability of products for specific application and assume all responsibilities in connection therewith.

 

 

VCT removal and polish before

 

 

VCT removal and polish 2

 

CorMAXX polishing system

 

20+yr old Terrazzo after Grind and polish

 

 

 

After 4steps

 

 

 

   

 

 

 

Not exactly what you want? 1 request,multiple quotations Get Quotations Now >>
Established in 2002, Yulin Leading Co., Ltd is a professional manufacturer and exporter of all sorts of diamond tools and machines.Polishing pads, Profile wheels, Router Bits, Drill Bits, Cup Wheels, CNC Tooling, Backer pads, Machinery for the industries of Granite, Marble, Porcelain, Concrete, Wood, Metal and more, for automatic machines as well as hand-held equipments. Our company is located in Yulin city, Guangxi province, China, with over 10,000 square meters of working area and over 200 ... View detail

Basic Information

Product/Service (We Sell): Concrete Floor Grinding Disc,Diamond Saw Blade,Hard Bond Round Grinding Plate,Hard Bond Square Grinding Plate,Resin Bond Polishing Pads  
Brands: DongSing  
Number of Employees: 501 - 1000 People  

Trade & Market

Main Markets: Central America
Africa
Eastern Asia
Southern Europe
South America
Eastern Europe
Southeast Asia
Northern Europe
Oceania
South Asia
Mid East
Western Europe
North America
Domestic Market
Total Annual Sales Volume: US$5 Million - US$10 Million  
Export Percentage: 51% - 60%  

Factory Information

Factory Size (Sq.meters): 10,000-30,000 square meters  
Factory Location: Hengwu Road, Economic Development Area, Yulin,Guangxi, China  
Number of Production Lines: 10  
Number of R&D Staff: 21 - 30 People  
Number of QC Staff: 31 - 40 People  
Contract Manufacturing: OEM Service Offered   Design Service Offered   Buyer Label Offered  

Supplier Assessment Report

Do you want to know more about this company before you make a deal? Request an Assessment Report.
Supplier Assessment Reports are detailed on-line reports about the supplier's capabilities. It helps you get all the information you need to trade confidently with suppliers.

Send your message to this supplier

Sourcing Products & Suppliers on Alibaba.com

Search Products
Enter the product you are looking for in the Search Bar and click Search
Contact Suppliers
Click Contact Now to send an inquiry or I’m online, Chat now to chat online
Check Messages
Check quotes & messages from suppliers in your email inbox or Message Center
China (Mainland) | Manufacturer, Trading Company | Contact Details
Experience: Established 2006 , 12 years OEM

Communicate with Supplier:

Mr. Mike Zou
Mr. Mike Zou:
What can I do for you?
Not exactly what you want?
1 request,multiple quotations Get Quotations Now >>
You May Like: