Cement Based Mosaic Adhesive

FOB Reference Price:Get Latest Price
US $0.3-0.35 / Kilogram | 10000 Kilogram/Kilograms (Min. Order)
Supply Ability:
100 Ton/Tons per Day
Report Suspicious Activity
Quick Details
CAS No.:
Other Names:
Place of Origin:
Guangdong, China (Mainland)
Other Adhesives
Main Raw Material:
cement base-single part
Brand Name:
Model Number:
cement based adhesive
multiple choice
Packaging & Delivery
Packaging Details
20kg/bag or 25kg/bag
1000bags/one 20GP container
Delivery Time
Shipped in 7 days after payment

  Cement Baseed Mosaic Adhesive



1. Has strong cohesion force. Reduce the common phenomenon of tiles detaching and peeling when pasted by Portland cement


2. Be premixed and produced, the product is stable, water and used, to protect the construction environment.


3. Has strong water retention, no need to dip tiles and wet walls, thin construction, easy operation, to reduce material consumption and building load.


4. Has good flexibility to resist effectively the destruction of various stresses.


5. Has special formula to avoid completely the common phenomenon of tiles cracking, detaching and peeling by Portland cement.


6. It is no-toxic, no-radiation, no smell and environmental.


7. Has special formula to prevent the flow with too much southbound crash, easier construction.





Tick up, grout, waterproofing, on various small tiles and mosaic, Reduce the cost, improve efficiency




1. Base plane should be smooth and firm, no dust, grease, release agents, batik material, etc.


2. Check base plane roughness by 2m guiding rule, error should be less than 5mm.


3. New plastering cement mortar could be constructed after 14 days maintenances.




1.Construction tools: leveling instrument, dentiform drawknife (3 x 3mm,4 x4mm,6×6mm,8×8mm,10 x10mm), tile generator, motor stirrer, big drum, cross-colloidal.


2.Stir and mix: mix tile adhesive and water as 25: (6-6.5) stirs completely and waiting for 5 minutes, stir again.


3.Lay-up construction: scrape the glue paste evenly on base plane with dentiform drawknife, the area should be about 1 m ² each time, then knead and press on the base plane. The model of the dentiform drawknife depends on the size of the tiles.




1. The vertical and smoothness of the substrate must be confirmed before construction.


2. The product is suitable for construction in the 5-40°C.


3. Don’t use the dried paste by reading water.


4. If the base plane is uneven or the back of tile is not smooth, wiping the paste on the back of brick in order to ensure it full with paste to avoid hollowing.



Use level list

Tile size

Drawknife size

Use level(kg/sqm)

10x10cm tile or mosaic or below

6x6mm toothform for base


60x60cm tile and stone or below

8x8mm toothform for base


60x60cm tile and stone or above

10x10mm toothform for base


60x60cm tile and stone or below, with deep groove

8x8mm toothform for base

3x3mm tooth form for tile back


60x60cm tile and stone or above, with deep groove

10x10mm toothform for base

3x3mm tooth form for tile back





Keep in a cool and dry place, unopened powder valid for one year.

Spec: 25kg/bag



Original tensile adhesive strength(Mpa)


Tensile adhesive strength after water(Mpa)


Tensile adhesive strength after thawing cycle(Mpa)


Tensile adhesive strength after standing for 20 min(Mpa)