US $1 - 25 / Piece10 Piece/Pieces
1500ma constant current led driver
1.IP67, CE, RoHs
3.PWM/1-10VDC singal/Resistor dimming
Name: Constant current waterproof IP67 35W 1500ma constant current led driver Model: WPB-035-1A50W
1.White plastic case
3.IP67 waterproof level,suitable for indoor/outdoor work environment.
4.Dimming type:Three in one dimming function(PWM/1-10VDC singal/Resistor)
5.Three years' warranty.
85%typ @100Vac, 87%typ @220Vac
0.25mAmax @ 230Vac
Output short circuit protection
Protection:Auto recovery after the fault removed
Protection mode:Limit highest voltage, recovery after the fault removed.
105°C±5 °C ( Internal radiator's temperature)
Protection mode:Closed Output voltage,recovery after temperature automatic recovery.
I/P-O/P: 100M Ohms/500Vdc
EN55015, GB17743 CLASSB
IEC61000-3-2 Class C compliant
High quality components
WINTEK'S factory's Photos:
Burn in house of led driver:
Well package to avoid damage
Feedback from customer
why you should buy LED drivers in the company of Wintek:
2012 Canton Fair
1, If constant current led driver 's specification above is some different from what you require actually, kindly inform us in detail. We will be pleased to re-offer you as per your actual requirements asap.
2, We can do the OEM products as per your specification.
3, We also provide other various types of led driver and switching power supply as you need. For more information, please visit our company website.
Customized design is available.
Important when installing ANY Power Supplies (PSUs):
The Power Supply used for the LED products should be of sufficient current, the LEDs will only draw the current they require from the Power Supply which means you can power just one 12vdc LED from a high Ampere PSU. Power Supplies should not be overloaded i.e the total load of the LEDs should not exceeed the rating of the Power Supply.
Space should be left around the Power Supply to allow ventilation, this allows any heat from PSU to dissipate.
Power Supplies should not be hidden in a wall or ceiling space that will be covered with plasterboard or panelling, there should be sufficient ventilation and an access panel for replacement of the PSU.
Cable between the output of the Power Supplies and the input to the LEDs/LED Products should be sufficient to carry the total load on it. Where the Power Supply exceeds the total load a safety fuse should be used, the fuse shoud be rated slightly higher than the load, for example a load of 1.8A on a 3.5A PSU should have a fuse of 2A between the positive (+) 12v output of the PSU and the positve (+) input to the LEDs.