waste plastic to diesel machine to fuel oil and diesel
Packaging & Delivery
Usually reactor of 10t is packed by 40FR. And the rest parts of waste plastic to diesel machine including all the pipes, valves and other spares necessary are loaded by 40HQ. We can also provide another 20GP according to customer's purchasing. It will be delivered up to your site on time. Complete care is taken in packaging to be completely damage free.
15 days after receiving deposit.
waste plastic to diesel
1,high quality with CE&ISO
2,18 years producing experience
3,55% Oil yield
Continuous production and no environmental pollution machine for waste plastic to diesel
Our factory-Henan Xinfeng Heating power Co.,Ltd.
Henan Morgan New Energy Co., Ltd. is attached to Henan Xinfeng Heating power Co.,Ltd. devoting itself into producing waste plastic to diesel machine used for the pyrolysis of used tyres and waste plastics. Countries as India, and districts like the South Asia, East Europe, etc. are our central market.
1. Brife introduction about continuous waste plastic to diesel machine
1) Using Q245R boiler steel and the thickness is all 16mm.(The thickness would be adjusted according the requirements of the customers). The main engine uses horizontal-type of 360° structure-0.8r/min
2) Gas separator & Depositing tank, Depart the heavy oil and impurities from the oil gas to purify the oil
3) Cooling system: use Cooling pool, based on Refining theory, whatever distillation of solid crude oil or waste oil, all finish by heating to gasification and cracking, and then cooling, so there is close relationship between the yield rate and condensation. So the best and easy way is increase the area of condense and which make the biggest yield rate
4) Dusty system: Desulfurization deducting, Water film cyclone, Bag deducting Desulfurization dedusting:remove the sculpture(when use coal as fuel) and dust Water film cyclone: for the second removal. Bag deducting: to make the smoke no different from the air
5) waste gas recycling system: In the process of refining oil, when the gas is heated up to 150 , it will produce a large amount of gas-CH4& C4H8 ,which cannot convert to liquid at normal temperature and normal pressure. However, these gases can be used as fuel, which is not only environment protection but also energy conservation
6) Carbon black recycles system: Heaving dragon screw conveyor.
2. Our cooling system of waste plastic to diesel machine ensures the oil rate, meanwhile, the raw material of waste plastic to diesel machine also affacts.
1)cooling system. Usually, ractor of 10tons, we provide 5 condensers, including 2 horizontal condensters, 2 waste gas condensers and 1 condenser pipe. Adding up to oil-water seperater, they will increase the rate of light oil you want get reaching to 52%.
2)The drier the waste plastics is, the higher the oil yield is. Thus, I suggest you make the waste plastic dry as possible as you can.
Approx oil yield of different raw materials
Leftovers of paper
Wet 15-20%, dry 60%
3. Certificates for our waste plastic to diesel machine
5. Features of our waste plastic to diesel machine
100% waste plastic pyrolysis is achieved
During and after the process; no soil, water or air pollution is observed.
Creates economically valuable products out of waste (all of the products are industrial raw materials
that have a market value).
The most cost-effective waste plastic to diesel technology in the world.
Raw material (waste plastic) is cheap and easy to provide.
Each recycled tons of plastic preserves 10 tons of CO2 that is a major greenhouse gas.
The process can be applied to all rubber based materials.
The system creates an alternative source of energy to replace petroleum products and natural gas.
System gives the opportunity to governments and local administrations to deal with the waste plastics.
Henan Morgan New Energy Co., Ltd. is a professional modern enterprise specialized in manufacturing waste tires/plastic/oil refining machines. We have been engaged in manufacturing pyrolysis machine for 20 years including 10 years of overseas market experience. We have three manufacturing plants, tens of independent & professional departments to serve global customers. Our company constantly implements advanced management, sales and technology, and learn the domestic and foreign management mode. ... View detail